All Category

Vacuum Blower Gun

Rating:
72%
from S$63.99
Min. 2 days
Two roles of suction and blow-off !!
Great for cleaning work with various tip nozzles!
The inside of the main body has a hollow structure that prevents suction from clogging. For cleaning after work * Never inhale dangerous materials.
* Do not use for anything other than suction and blow-off work. Also, do not use it to inhale dust or liquid.
* Be sure to follow the instruction manual when performing the work. Never use it incorrectly or modify it as it may cause a serious accident or injury.
* Do not use for anything other than its intended purpose.
Operating Pressure (MPa):  0.4~0.6 (recommended)
Maximum Operating Pressure (MPa):  0.8
Mass of Main Unit (g):  About 300
Air Consumption (L/min):  About 60L/min (at 0.4Mpa)
Discharge Air Volume (L/min):  Approx. 850 or more (at 0.4 MPa)
Caution
This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
Item #
Mfr #
Package Qty
Shipping
Price
Qty
 
 
 
1pc
Min. 2 days
S$63.99
- +
Page
  • Item #: 46747407

    Mfr #: M-222

    Package Qty: 1pc

    S$63.99

    Shipping: Min. 2 days

    Technical Specs:

    - +
Page

Customer Reviews

Items 1 - 10 of 65

Show per page
  1. Cleaning of chips from sheet metal work, sanding powder, etc.
    Rating
    100%
    I use a commercial compressor, but the suction power is enough. It can also suck nuts and bolts. I had a hard time with a commercial vacuum cleaner, so I think it has sufficient ability and cost performance. As a blower, I use a normal air gun, so I don't use it, but when I tried it, it was a little noisy.
    (Translated by machine.)

    Review by

    Posted on

  2. Cleaning the floor at the welding site
    Rating
    100%
    It sucks up the dust on the floor more and more. Rub the cloth of the bag and dust will fly. It has suction power, so you can use it if you devise a way to dispose of the dust.
    (Translated by machine.)

    Review by

    Posted on

  3. It is mainly used for daily cleaning of factories.
    Rating
    80%
    It is very kind that the accessory has a seal tape to prevent air leakage of the male coupler ◎ The suction power is a little unsatisfactory △ The dust bag exhausts a lot of dust, so please change to a finer bag and it is smaller Too much × The hope for improvement is that the fixing screw (red handle) of the fixing band can be easily removed, so if you do not usually remove it and store it, it will be lost immediately. I want you to make it with metal fittings so that it will not come off. However, it is about 5,000 yen including tax and you can buy it with so many accessories ◎ There is no loss to buy
    (Translated by machine.)

    Review by

    Posted on

  4. Car and motorcycle maintenance
    Rating
    100%
    Even though it is compact, you can get a larger air volume than you expected. I'm glad I bought it.
    (Translated by machine.)

    Review by

    Posted on

  5. Agricultural work machine maintenance
    Rating
    80%
    Wheat and beans that are useful for cleaning the combine harvester Easy to clean the car that can absorb the liquid that can collect beans Compressor-sama Vacuum gun-sama Compressor-related machinery is basically noisy, so it is better to have earplugs
    (Translated by machine.)

    Review by

    Posted on

  6. vacuum pack
    Rating
    80%
    I was sucking it with a vacuum cleaner, but it stopped due to overheating on the way, but when I roughly pulled it with a blower gun and then sucked it with a vacuum cleaner, it stopped overheating.
    (Translated by machine.)

    Review by

    Posted on

  7. Cleaning the workplace Cleaning the gaps in the window sash, etc.
    Rating
    100%
    I use it to clean the workplace (garage). Not only the car but also the dust in the window sash of the garage could be easily cleaned. The improvement is that the dust from the bag that collects dust is a little dirty, and it is the best if a little more dust does not leak to the outside. But I feel that the cost performance is high.
    (Translated by machine.)

    Review by

    Posted on

  8. Used to replace the material bag
    Rating
    100%
    How about because the price is cheap? I thought, but there is no problem in using it. I am happy to be able to purchase 3 of them at the prices of other manufacturers.
    (Translated by machine.)

    Review by

    Posted on

  9. Machine maintenance
    Rating
    80%
    It's cheaper than when I bought it at the store before, and it's useful because it doesn't change the usability.
    (Translated by machine.)

    Review by

    Posted on

  10. When painting
    Rating
    100%
    I think the price is low and the production is solid. It is necessary and sufficient.
    (Translated by machine.)

    Review by

    Posted on

Items 1 - 10 of 65

Show per page
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account