This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
An adjustment spacer that makes the cable end body system 8 mm when used in combination with the cable end set (Φ6 x 10).
* We recommend that you ask a maintenance company to replace this product. Compensation may not be possible if the replacement work is done individually.
Type: Φ6→Φ8
Caution
- S$2.39
Shipping: Min. 2 days
Technical Specs:
Page
Customer Reviews
- Bike repairI bought it because the clutch wire of the motorcycle broke. Because it is an old model, it does not come out of the manufacturer. I think it is firmly fixed. If you look at the situation and there is no problem, I would like to purchase another set for emergencies.
(Translated by machine.)This is a review for Item # : 75796646.Posted on
- Trike wire repairI used it to repair the back wire of the trike and it was very good.
(Translated by machine.)This is a review for Item # : 75796646.Posted on
- End cover repairThe end cover that was originally attached was damaged, so I replaced it. I made a notch and replaced it.
(Translated by machine.)This is a review for Item # : 75796646.Posted on
- Due to deterioration of the clutch cable Tyco coverPurchased due to deterioration of the clutch cable Tyco cover. Since the outer diameter could be adjusted with this product, it could be used without replacing the clutch wire.
(Translated by machine.)This is a review for Item # : 75796646.Posted on
- Bike accelerator wireI bought it to fix the drum part on the grip side of the accelerator cable, but it was useless after all. I bought the SRX to prevent the drum part of the return cable from being too big and twisting the cable, but the result could not be used.
(Translated by machine.)This is a review for Item # : 75796646.Posted on
Write Your Own Review