This is a high-quality product manufactured by a domestic manufacturer that is used by domestic car manufacturers as a genuine product. The material is non-asbestos and uses NAO material, which is most suitable for domestic vehicles. *However, only the order code: 01080275 is made of low steel instead of NAO material.
As a replacement for brake pads for domestic cars
*Because this product is an important safety part, please be sure to entrust the replacement work to a certified and well-equipped maintenance company. Even if you have a maintenance qualification such as a user vehicle inspection, if you perform replacement work yourself, you will be responsible for it, so we cannot compensate you. *When replacing worn brake pads, replace the rotors at the same time. If you continue to use a worn rotor, cracks and edges of the rotor may affect it, and the pad may peel off or fall off, which is very dangerous.
*If the product is left with moisture or salt on it for a long time, rust may occur and the adhesion of the pad may be affected. After the snow-melting agent has adhered, wash it off well and do not leave it wet for a long period of time. *If an acidic cleaning agent is used, the cleaning agent may permeate between the friction material and the metal plate, making it easier to rust. . * Please read carefully the warnings included with the product before use. Even with the same car model and the same engine model, it may not fit depending on the model year. Be sure to check the genuine number. *Please be sure to check the compatible product from the parts search before purchasing. * Products will be changed to products without the Monotaro logo. *Be sure to perform legal inspections. If you do not observe the replacement period of this brake pad, it is very dangerous because the disc may be scratched and the brake may not work. The guideline for replacement is when the remaining thickness of the wear material is 4 to 5 mm. * Since the brakes are hot right after driving, there is a risk of burns if you replace the brake pads immediately after driving. Make sure the brakes are sufficiently cold before starting work. Also, wear a mask to prevent dust from being inhaled due to wear, and gloves to prevent injury during replacement work. *If the brake pads are dropped or impacted, the brake pads may be damaged and the specified braking performance may not be achieved. *If you drive in the following conditions, the brakes may be damaged, or the temperature of the brakes may rise abnormally. 1. Repeatedly meaningless sudden braking from high speed 2. Reckless driving exceeding the legal speed limit 3. Driving in a state exceeding the maximum load weight 4. Only using the foot brake without using the engine brake on a long downhill Driving while using 5. Driving with the parking brake not fully released Please check before driving. *Since the newly replaced brake pads are not familiar with the disc, stable braking force may not be obtained. Please run after confirming the effectiveness.
*If the product is left with moisture or salt on it for a long time, rust may occur and the adhesion of the pad may be affected. After the snow-melting agent has adhered, wash it off well and do not leave it wet for a long period of time. *If an acidic cleaning agent is used, the cleaning agent may permeate between the friction material and the metal plate, making it easier to rust. . * Please read carefully the warnings included with the product before use. Even with the same car model and the same engine model, it may not fit depending on the model year. Be sure to check the genuine number. *Please be sure to check the compatible product from the parts search before purchasing. * Products will be changed to products without the Monotaro logo. *Be sure to perform legal inspections. If you do not observe the replacement period of this brake pad, it is very dangerous because the disc may be scratched and the brake may not work. The guideline for replacement is when the remaining thickness of the wear material is 4 to 5 mm. * Since the brakes are hot right after driving, there is a risk of burns if you replace the brake pads immediately after driving. Make sure the brakes are sufficiently cold before starting work. Also, wear a mask to prevent dust from being inhaled due to wear, and gloves to prevent injury during replacement work. *If the brake pads are dropped or impacted, the brake pads may be damaged and the specified braking performance may not be achieved. *If you drive in the following conditions, the brakes may be damaged, or the temperature of the brakes may rise abnormally. 1. Repeatedly meaningless sudden braking from high speed 2. Reckless driving exceeding the legal speed limit 3. Driving in a state exceeding the maximum load weight 4. Only using the foot brake without using the engine brake on a long downhill Driving while using 5. Driving with the parking brake not fully released Please check before driving. *Since the newly replaced brake pads are not familiar with the disc, stable braking force may not be obtained. Please run after confirming the effectiveness.
Caution
This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
Alternate Products
Customer Who Bought This Product Also Bought
Customer Who Viewed This Product Also Viewed
Customer Reviews
- light car pad replacementWe can use without problem in particular. It's cheap, so you can easily replace it.
(Translated by machine.)This is a review for Item # : 01079462.Posted on
- brake pad replacementI've already used this brake pad for dozens of cars, but it's a big deal that there's never been a problem. I think that it is a perfect product for those who are not particular about cars and want to do it cheaply.
(Translated by machine.)This is a review for Item # : 01079548.Posted on
- car maintenanceI replaced the item I had purchased before due to the replacement time, the size was perfect, and it was good without brakes.
(Translated by machine.)This is a review for Item # : 01079478.Posted on
- car maintenanceI purchased a manufacturer's product two months ago, but since I also replaced the rotor this time, I purchased a monotaro product. It was cheap and helpful. In addition, it would have been better if grease was included.
(Translated by machine.)This is a review for Item # : 01080083.Posted on
- car maintenance,It doesn't come with a <sim version> that fits the pad, and there are no optional items.
(Translated by machine.)This is a review for Item # : 01079444.Posted on
- during brake maintenanceThis time, I used it to replace the front wheel pads during brake maintenance, but I think it's easy to use.
(Translated by machine.)This is a review for Item # : 01079444.Posted on
- Vehicle inspection maintenanceUsed for car inspection maintenance I was able to install it without problems. The customer is happy because there is not much brake dust.
(Translated by machine.)This is a review for Item # : 01079548.Posted on
- brake pad replacementThere is no squeal, and the price is cheap and useful. It is very helpful because the delivery is fast
(Translated by machine.)This is a review for Item # : 01079444.Posted on
- MaintenanceI used it in my car before and had no problems, so this time I used it in my family's car. I will continue to choose this product when I need it.
(Translated by machine.)This is a review for Item # : 01079478.Posted on
- pad replacementThere is no problem. This is enough for normal use.
(Translated by machine.)Posted on
Write Your Own Review