All Category

Extractor + spiral type

Rating:
67%
from S$2.39
Min. 2 days
It is possible to remove broken bolts without damaging the screw holes. For removing broken bolts * If excessive force is applied, it may break.
* Cannot be used for heat-treated bolts.
* Handle is not included.
Material:  Chromium molybdenum (heat treated)
Hardness:  HRC43~47
Caution
This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
Item #
Mfr #
Package Qty
Shipping
Price
Qty
 
 
 
1pc
Min. 2 days
S$2.39
- +
1pc
Min. 2 days
S$2.69
- +
1pc
Min. 2 days
S$3.19
- +
Bolt Screw Size
Tip Diameter (mm)
Width Across Flats (mm)
Base Diameter (Φmm)
Overall Length (mm)
Pilot Hole Diameter
all
all
all
all
all
all
1/8"~1/4"(3mm~6mm)
2
3.2 (shank)
4
53
7/64"(2.7mm)
1/4"~5/16"(6mm~8mm)
3
3.9 (shank)
5
60
9/64"(3.5mm)
5/16"~7/16"(8mm~11mm)
4
5.2 (shank)
6.5
69
5/32"(4mm)
Page
Bolt Screw Size
Tip Diameter (mm)
Width Across Flats (mm)
Base Diameter (Φmm)
Overall Length (mm)
Pilot Hole Diameter
  • Item #: 52668158

    Mfr #: 3-6

    Package Qty: 1pc

    S$2.39

    Shipping: Min. 2 days

    Technical Specs:

    Bolt Screw Size 1/8"~1/4"(3mm~6mm) Tip Diameter (mm) 2 Width Across Flats (mm) 3.2 (shank) Base Diameter (Φmm) 4 Overall Length (mm) 53 Pilot Hole Diameter 7/64"(2.7mm)

    - +
  • Item #: 52668167

    Mfr #: 6-8

    Package Qty: 1pc

    S$2.69

    Shipping: Min. 2 days

    Technical Specs:

    Bolt Screw Size 1/4"~5/16"(6mm~8mm) Tip Diameter (mm) 3 Width Across Flats (mm) 3.9 (shank) Base Diameter (Φmm) 5 Overall Length (mm) 60 Pilot Hole Diameter 9/64"(3.5mm)

    - +
  • Item #: 52668176

    Mfr #: 8-11

    Package Qty: 1pc

    S$3.19

    Shipping: Min. 2 days

    Technical Specs:

    Bolt Screw Size 5/16"~7/16"(8mm~11mm) Tip Diameter (mm) 4 Width Across Flats (mm) 5.2 (shank) Base Diameter (Φmm) 6.5 Overall Length (mm) 69 Pilot Hole Diameter 5/32"(4mm)

    - +
Page

Customer Reviews

9 Item(s)

Show per page
  1. bike maintenance
    Rating
    20%
    It broke quickly at the shank part with the light force of the first use. It was either useless or dangerously stuck. Are you strength testing?
    (Translated by machine.)

    Review by

    Posted on

  2. Used to take out broken screws
    Rating
    100%
    I used a 2.7 drill bit to make an introduction hole ... I took out the broken M6-24 screw, but it came off safely.
    (Translated by machine.)

    Review by

    Posted on

  3. Removal of broken bolts
    Rating
    80%
    The M5 bolt broke, but I made a 3mm pilot hole and managed to remove it using an extra cler.
    (Translated by machine.)

    Review by

    Posted on

  4. Removed broken screws
    Rating
    80%
    It would have been convenient to have a lineup of a slightly smaller size. You can pull it out, but it was important to choose the one that matched the size of the screw.
    (Translated by machine.)

    Review by

    Posted on

  5. Removal of head screw
    Rating
    100%
    It was very easy to remove and it was very helpful.
    (Translated by machine.)

    Review by

    Posted on

  6. When removing the licked slow jet.
    Rating
    20%
    Others have also reviewed it, but it's too weak. It breaks easily and is useless.
    (Translated by machine.)

    Review by

    Posted on

  7. Broken bolt
    Rating
    20%
    I used it after drilling the specified hole properly, but it broke immediately. It was explained that it cannot be used for heat-treated bolts, but I don't know if the bolt I tried to pull out was heat-treated. Anyway, I'm sorry. It didn't make sense to buy it because it broke with the first bolt. While many of Monotaro's products are good, it is necessary to be careful as such products are sometimes mixed.
    (Translated by machine.)

    Review by

    Posted on

  8. It broke immediately. The matter of the previous day
    Rating
    100%
    Please cancel yesterday's word-of-mouth communication. The way I applied my tension may have been slanted, so thank you.
    (Translated by machine.)

    Review by

    Posted on

  9. Bike maintenance
    Rating
    80%
    I was looking for a small diameter because the bite was bad with the applicable diameter that is generally shown. I'm about to use it, but it looks like it can be used.
    (Translated by machine.)

    Review by

    Posted on

9 Item(s)

Show per page
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account