All Category

Airbrush gun featured products

  1. Compressor Air-K
    AIRTEX Compressor Air-K
    Step pressure mode switching type airbrush interlocking auto switch method Small size (W130 x D90 x H50) and lightweight Weighs 272g Two airbrush holders are standard equipment that allows you to set the airbrush in the desired direction according to the direction of the compressor.
    Operation Sound (dB)  45 or less  Mass (g)  272  Dimensions, Width W x Depth D x Height H (mm)  130×90×50  Rated Voltage (V)  AC100~240  Rated Time (minutes)  30  Power Consumption (W)  7.2  Maximum Pressure (MPa)  0.1  Air Discharge Rate (L/min)  Frequency (Hz)  50/60 
    from S$279.90
    Min. 2 days
  2. Air Lat Recommended Compressor Wing
    AIRTEX Air Lat Recommended Compressor Wing
    Ultra-compact compressor with built-in battery. Since it has a built-in battery, it can be used outdoors. USB type charging cable. It can be used while charging. Recommended compressor for airbrush Cotori
    Capacity  (Battery) 7.4V, 500mA  Size  (Hose connection) S  Volume (dB)  (Operation) 45  Main Unit Dimensions, Width W x Depth D x Height H (mm)  115×65×45  Mass of Main Unit (g)  238  Air Discharge Rate (L/min)  Operation Time (minutes)  45  Power Consumption (W)  7.2  Charging Time (minutes)  90  Maximum Pressure (MPa)  About 0.1 
    from S$329.90
    Min. 2 days
  3. Airbrush Kit
    ANEST IWATA Airbrush Kit
    A standard airbrush kit.
    Rating:
    100%
    from S$459.90
    Min. 2 days
  4. Low Pressure Spray Gun Gravity Type
    ANEST IWATA Low Pressure Spray Gun Gravity Type
    High coating efficiency and low scattering make it possible to reduce the amount of paint used. It is useful for improving the painting environment because there is little scattering and rebound of paint mist. For automobiles, metals, woodworking, furniture and plastic painting. * Cup is sold sep... Read More
    Paint Inlet  (Cup Air) G1 / 4  Required Compressor (kw)  0.2~0.75  Mass (g)  220  Air Consumption (L/min)  50  Material (Main Unit)  Aluminum die casting  Specification  Gravity type  Atomization  High fines  Material (Connecting Part)  Stainless steel 
    Rating:
    88%
    from S$249.90
    Min. 2 days
  5. Air Rat Recommended Airbrush Cotori
    AIRTEX Air Rat Recommended Airbrush Cotori
    Easy to handle even for women and children with small hands. Easy to use without the need for difficult adjustments. With removable airbrush stand. For airbrush art * Solvent-based materials cannot be used.
    Capacity (mL)  (Paint cup) 5  Nozzle Diameter (Φmm)  0.3  Included Accessories  Nozzle wrench 
    from S$119.90
    Min. 2 days
  6. baby nipper
    MINESHIMA baby nipper
    A hobby-only nipper made for making plastic models. The grip comes with a soft-touch, easy-to-grip cover.
    Overall Length (mm)  110  Spring  Attached 
    Rating:
    100%
    from S$7.69
    Min. 2 days
  7. Spray gun KIWAMI (gravity type) exclusively for car repair
    ANEST IWATA Spray gun KIWAMI (gravity type) exclusively for car repair
    A series specializing in environmentally friendly paints (low solvent 1-component base coat, high solid clear, etc.) and high-difficulty paint colors (color clear, matte clear, etc.) that are currently mainstream. Realization of "wet coat" by optimal "flat & wide pattern" ... Read More
    Required Compressor (kw)  1.5~2.2 
    from S$299.90
    Min. 2 days
  8. Small spray gun WIDER1 (Suction type)
    ANEST IWATA Small spray gun WIDER1 (Suction type)
    Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
    Mounting Screw Diameter  (Paint): G1 / 4, (Air): G1 / 4  Air Pressure (MPa)  0.24  Spray Distance (mm)  200  Mass (g)  290  Paint Feeding System  Suction type 
    from S$259.90
    Min. 2 days
  9. Small Spray Gun WIDER1 (Gravity Type)
    ANEST IWATA Small Spray Gun WIDER1 (Gravity Type)
    Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
    Mounting Screw Diameter  (Paint): G1 / 4, (Air): G1 / 4  Air Pressure (MPa)  0.24  Spray Distance (mm)  200  Mass (g)  290  Paint Feeding System  Gravity type 
    from S$259.90
    Min. 2 days
  10. Small spray gun HVLP WIDER 1L (gravity type)
    ANEST IWATA Small spray gun HVLP WIDER 1L (gravity type)
    Mounting Screw Diameter  (Paint): G1 / 4, (Air): G1 / 4  Paint Viscosity  20 seconds / NK-2  Spray Distance (mm)  200  Mass (g)  290  Paint Feeding System  Gravity type  Atomization  High fines  nipple  Paint G1 / 4, air G1 / 4  Cap Type  WIDER1L-2-J2  Suitable Air Cap Type  WIDER1L-2-J2 
    from S$459.90
    Min. 2 days
  11. Exhaust gasket
    NTB Exhaust gasket
    We have a lineup of exhaust gaskets for various vehicles from 50cc scooters to large vehicles. * We recommend that you ask a maintenance company to replace this product. Compensation may not be possible if the replacement work is done individually.
    Rating:
    82%
    from S$3.89
    Min. 2 days
  12. Exhaust Muffler Gasket
    KITACO Exhaust Muffler Gasket
    A must-have item when replacing the muffler! Abundant types corresponding to 4 domestic manufacturers! Affordable 2/4 piece set sale! The muffler and cylinder head are in close contact to prevent exhaust leakage. * The muffler gasket is a non-reusable consumable part that collapses once used. If ... Read More
    Rating:
    93%
    from S$5.49
    Min. 2 days
  13. Large spray gun WIDER2 (Suction type)
    ANEST IWATA Large spray gun WIDER2 (Suction type)
    Achieves a weight reduction of 5g compared to the past. Since the various knobs are tapered and the grooves are deepened, it is easy to make fine adjustments due to the high grip. In addition, smooth paint adjustment is possible by incorporating resin parts behind the needle valve spring. Further... Read More
    Mounting Screw Diameter  (Paint): G3 / 8, (Air): G1 / 4  Air Pressure (MPa)  0.29  Spray Distance (mm)  250  Mass (g)  375  Paint Feeding System  Suction type 
    from S$299.90
    Min. 2 days
  14. Strong family suction cup clip type
    SANYU Strong family suction cup clip type
    Uses non-PVC material that is kind to the earth. Comes with a clip.
    Safety Load (kg)  0.3  Width (mm)  22  Diameter (Φmm)  25  Type  Clip type  Material  Elastomer resin 
    Rating:
    80%
    from S$5.69
    Min. 2 days
  15. Intuitive Cube Japan X-Guard Suction cup stand
    Logic Intuitive Cube Japan X-Guard Suction cup stand
    Main features. Can be attached to the X-Guard smartphone case. Powerful diameter vacuum suction cup A suction cup with excellent impact resistance can be used in a moving car. The connection part can rotate 360 degrees and can be easily installed. No special tools are required.
    from S$33.99
    Min. 2 days
  16. Gaona Suction cup type shower hook Installed in a bath (adhesive gel for most walls Silver easy installation)
    GAONA Gaona Suction cup type shower hook Installed in a bath (adhesive gel for most walls Silver easy installation)
    A shower hook that is a suction cup type and easy to install. It is a strong adhesive gel that firmly adheres to uneven walls that were easy to remove with conventional suction cups. It sticks not only to the wall of the unit bath but also to the rough wall without an auxiliary version. As it is ... Read More
    Color  Silver  Material  Polycarbonate, ABS resin, elastomer 
    from S$32.99
    Min. 2 days
  17. Suction cup mount
    PENTAX Suction cup mount
    Since the camera is fixed on a flat surface by the force of the suction cup, it can be attached and detached repeatedly. * WG series cameras other than WG-M1 and M2 cannot be fixed directly, so be sure to attach them to the separately sold "WG Holder O-CH1470".
    Mass (g)  About 90  Outer Dimensions (mm)  Approx. 79 (diameter) x 50 (high)  Diameter of Suction Surface (Φmm)  Diameter 80 
    from S$63.99
    Min. 2 days
  18. eSecurity (suction cup type mounting parts)
    SANWA SUPPLY eSecurity (suction cup type mounting parts)
    Material (Main Unit)  ABS  Material (Back)  Rubber  Diameter (Φmm)  Sucker: 62 
    from S$29.99
    Min. 2 days

Other Related Pages