To pull out the parts, use a combination of a separator (13, 15, 17 series) and a puller device (18 series) of a suitable size. Screw the bolts of the matching puller device into the two tap holes on the separator. The claws on the separator are very sharp and go into the back of the part and ext... Read More
Large and easy-to-read large screen display. Counts anywhere, such as bags and pockets. Data for 34 days is memorized and the history is displayed.
Calories (kcal) (Consumption) 0-9999 Distance (km) (Steps) 0.0-999.9k Accuracy (%) (Steps) Within ± 3 Detection Method 3D acceleration sensor type Dimensions, Width W x Depth D x Height H (mm) 66×13×39 Automatic Power Off About 1 minute Mass (g) About 24 Type of Display LCD digital 5 digits Power Supply Lithium battery CR2032 x 1
A set of pullers that pull out gears, bearings, pulleys, etc. It is a set that comes with two types of separators and bolts with diameters of 30 to 50 mm and 50 to 75 mm. Since the separator can be used in combination with a press, bearings and gears that are stuck to the shaft can be separated u... Read More
Bolt circle A hub puller for passenger cars, vans and trucks with a diameter of 110 to 250 mm. The movable cup part always exerts a uniform force on the hub, preventing damage to the wheel studs. It is a 5-arm type.
A set of pilot bearing pullers that can be pulled out by hooking the claws of the main body on the inner collar of the inner bearing type bearing. Attach an attachment that matches the inner diameter size of the bearing and connect it to the main body. ・ After that, the bearing can be pulled out... Read More