All Category

Inner bearing puller featured products

  1. Bearing Puller Set
    MonotaRO Bearing Puller Set
    A set of pullers that pull out gears, bearings, pulleys, etc. It is a set that comes with two types of separators and bolts with diameters of 30 to 50 mm and 50 to 75 mm. Since the separator can be used in combination with a press, bearings and gears that are stuck to the shaft can be separated u... Read More
    Size (mm)  18 (center bolt head) 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  2. Deep Groove Ball Bearings 6800 Series LLB (Double Non Contact Rubber Seal Type)
    NTN Deep Groove Ball Bearings 6800 Series LLB (Double Non Contact Rubber Seal Type)
    Deep groove ball bearings that are most widely used among bearings. Deep groove ball bearings have deep arcuate grooves on both the inner and outer rings, and can receive radial loads, axial loads in both directions, or combined loads that are a combination of these, making them suitable for high... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Material (Main Unit)  High carbon chromium bearing steel  Rolling Element Material  High carbon chromium bearing steel  Shield Shape  Non-contact seal type on both sides  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    96%
    from S$7.19
    Min. 2 days
  3. Ball Bearing 6800 Series 2RZ, non-contact Rubber Seal on Both Side
    MonotaRO Ball Bearing 6800 Series 2RZ, non-contact Rubber Seal on Both Side
    JIS Grade  Chamfer Dimension r (mm)  0.3  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Rolling Element Material  High carbon chromium bearing steel  Material (Main Unit)  High carbon chromium bearing steel  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    73%
    from S$4.99
    Min. 2 days
  4. A Small ball bearing
    NTN A Small ball bearing
    Bearings that are shielded on both sides with synthetic rubber, and have excellent dust resistance and low noise. For high-speed rotation that does not require as much dustproof performance as the shield type.
    Operating Temperature Range  -25~120℃  JIS Grade  Mass (g)  19.2  Basic Static Load Rating Cor (N)  1960  Outer Diameter D (Φmm)  26  Permissible Speed (min-1) Grease Lubrication  30000  Permissible Speed (min-1) Oil Lubrication  35000  Trusco Part No.  423-5916  Basic Dynamic Load Rating Cr (N)  4550  Width B1 (mm)  Inner Diameter d (Φmm)  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Material (Main Unit)  High carbon chromium bearing steel  Rolling Element Material  High carbon chromium bearing steel  Shield Shape  Non-contact seal type on both sides  Load Direction  Radial  Number of Track Trains  Single row 
    from S$2.99
    Min. 2 days
  5. Stainless steel bearing stainless seal
    KSK (Nakai Bearing Factory) Stainless steel bearing stainless seal
    It is stable against rust and can be used stably up to high temperatures (the operating temperature range is about 50 ° C higher than general bearing materials). We guarantee JIS 0 class or higher accuracy for dimensional accuracy and rotation accuracy, which have high resistance to chemicals. Al... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Load Direction  Radial  Rolling Element Material  SUS440C  Material (Main Unit)  SUS440C  Number of Track Trains  Single row  Shield Shape  Stainless steel seal on both sides 
    Rating:
    100%
    from S$6.99
    Min. 2 days
  6. Single Row Deep Groove Ball Bearings 6900 Series Open Type
    NSK (Nippon Seiko) Single Row Deep Groove Ball Bearings 6900 Series Open Type
    Single row deep groove ball bearings are the most typical type of rolling bearings and have a wide range of uses. The orbital grooves provided on the inner and outer rings form a cross section of an arc having a radius slightly larger than the radius of the rolling ball. In addition to radial loa... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Rolling Element Material  High carbon chromium bearing steel  Material (Main Unit)  High carbon chromium bearing steel  Shield Shape  Open type  Load Direction  Radial  Number of Track Trains  Single row  Dimension r0 (mm)  Dimension rN (mm)  Dimension D2 (Φmm)  Mounting Dimension (Minimum Dx) (Φmm)  Mounting Dimensions (Maximum Cx) (mm)  Dimension a (mm)  Dimension f (mm)  Dimension b (mm)  Dimension D1 (Φmm) 
    Rating:
    95%
    from S$4.99
    Min. 2 days
  7. Deep Groove Ball Bearings 6000 Series ZZ
    MonotaRO Deep Groove Ball Bearings 6000 Series ZZ
    * Do not use for anything other than its intended purpose.
    Race Ring Shape  Deep groove ball bearings  Shield Shape  Double-sided steel plate shield type  Outer Ring Type  Flat  Material (Main Unit)  High carbon chromium bearing steel  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    92%
    from S$2.59
    Min. 2 days
  8. Single Row Deep Groove Ball Bearings 6800 Series Open Type
    NSK (Nippon Seiko) Single Row Deep Groove Ball Bearings 6800 Series Open Type
    Single row deep groove ball bearings are the most typical type of rolling bearings and have a wide range of uses. The orbital grooves provided on the inner and outer rings form a cross section of an arc having a radius slightly larger than the radius of the rolling ball. In addition to radial loa... Read More
    Mounting Dimensions (Maximum Cx) (mm)  Dimension a (mm)  Dimension f (mm)  Dimension D2 (Φmm)  Dimension b (mm)  Dimension r0 (mm)  Dimension D1 (Φmm)  Mounting Dimension (Minimum Dx) (Φmm)  Dimension rN (mm)  JIS Grade  Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Rolling Element Material  High carbon chromium bearing steel  Material (Main Unit)  High carbon chromium bearing steel  Shield Shape  Open type  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    100%
    from S$5.59
    Min. 2 days
  9. Stainless bearing 6800 series double rubber seal type
    NSK (Nippon Seiko) Stainless bearing 6800 series double rubber seal type
    Stainless steel bearings are the basic product of NSK special environmental bearing Spacia TM series, and are mainly suitable for high humidity environment. The lineup is affordable. Corrosion resistance superior to bearing steel. For air only, grease lubrication. The cage is made of glass fiber ... Read More
    JIS Grade  Race Ring Shape  Deep groove ball bearings  Shield Shape  Double contact seal type  Outer Ring Type  Flat  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    100%
    from S$6.99
    Min. 2 days
  10. Deep Groove Ball Bearings 6900 Series LLB (Double Non Contact Rubber Seal Type)
    NTN Deep Groove Ball Bearings 6900 Series LLB (Double Non Contact Rubber Seal Type)
    Deep groove ball bearings that are most widely used among bearings. Deep groove ball bearings have deep arcuate grooves on both the inner and outer rings, and can receive radial loads, axial loads in both directions, or combined loads that are a combination of these, making them suitable for high... Read More
    Race Ring Shape  Deep groove ball bearings  Outer Ring Type  Flat  Material (Main Unit)  High carbon chromium bearing steel  Rolling Element Material  High carbon chromium bearing steel  Shield Shape  Non-contact seal type on both sides  Load Direction  Radial  Number of Track Trains  Single row 
    Rating:
    96%
    from S$6.49
    Min. 2 days
  11. Armature Bearing Puller
    SUPER TOOL Armature Bearing Puller
    Ideal for pulling out small-diameter bearings installed in power tools, home appliances, automobiles, etc.
    Specification  With speed knob for quick fastening 
    Rating:
    94%
    from S$49.99
    Min. 2 days
  12. 2.3 Claw-type gear puller
    TRUSCO 2.3 Claw-type gear puller
    The unique "claw always closes" structure, which is not available in Japan, makes it easy to attach to the pulley. You can use 2 or 3 claws according to the purpose.
    Minimum Diameter to Extract (mm)  76 
    from S$99.99
    Min. 2 days
  13. Bearing race seal set
    JTC Bearing race seal set
    Convenient for driving bearings and seals.
    Material  Aluminum alloy  Size (mm)  39.5、44、49.5、59、62、64.5、71.5、76、80.5 
    from S$169.90
    Min. 2 days
  14. Pilot Bearing Puller Set
    MonotaRO Pilot Bearing Puller Set
    A set of pilot bearing pullers that can be pulled out by hooking the claws of the main body on the inner collar of the inner bearing type bearing. Attach an attachment that matches the inner diameter size of the bearing and connect it to the main body. ・ After that, the bearing can be pulled out... Read More
    Applicable bearing inner diameter (Φmm)  8 ・10 ・12 ・15 ・17 ・20 ・25 
    Rating:
    82%
    from S$159.90
    Min. 2 days
  15. Slide hammer set
    JTC Slide hammer set
    The hub, hub bearing, and drum brake can be removed.
    Mass (kg)  (Hammer) 2.3  Screw Dimensions  5/8×18UNF 
    Rating:
    40%
    from S$279.90
    Min. 2 days
  16. Single Row Deep Groove Ball Bearings 6900 Series ZZ
    NSK (Nippon Seiko) Single Row Deep Groove Ball Bearings 6900 Series ZZ
    Single row deep groove ball bearings are the most typical type of rolling bearings and have a wide range of uses. The orbital grooves provided on the inner and outer rings form a cross section of an arc having a radius slightly larger than the radius of the rolling ball. In addition to radial loa... Read More
    Dimension D2 (Φmm)  Dimension b (mm)  Dimension f (mm)  Dimension rN (mm)  Dimension D1 (Φmm)  Mounting Dimension (Minimum Dx) (Φmm)  Mounting Dimensions (Maximum Cx) (mm)  Dimension r0 (mm)  Dimension a (mm) 
    Rating:
    96%
    from S$6.19
    Min. 2 days
  17. Miniature ball bearing F-WBC
    NTN Miniature ball bearing F-WBC
    Race Ring Shape  Miniature ball bearings 
    from S$6.79
    Min. 2 days

Other Related Pages