The reviews are automatic translation.
Polishing of small wooden items
On 2019-05-15 18:36:57
It is cheap, and it is easy to use polishing, but it is good if there is something a little smaller in diameter. . .
Grinding of aluminum
On 2019-05-15 00:09:28
Because we usually use ichiguchi made and price is overwhelmingly cheap
I purchased several times.
Unfortunately, it's worn out quickly and its life is not good,
The same gear is used but the finish is coarser than conventional products
Especially in corner grinding, secondary burrs are likely to occur.
It would be fine if it was a hobby use or a stock that is rarely used,
It is not recommended if you always use it.
Used to expand the intake and exhaust ports of a motorcycle
On 2019-04-02 18:45:09
To expand engine intake and exhaust port of super cub and big scooter
In use. I am careful not to cut too much because it is so funny.
This work can be saved with five one box because work is finished if there are two in one cylinder.
On 2019-03-30 14:13:33
It is usable without inferiority compared with other companies (他 社 T company) made high.
On 2019-03-08 22:51:16
If the rotation is slow, the sharpness is bad.
But this is a mechanical problem,
It is not a problem of this product itself.
If you feel clogged up,
I have a group of diamond bricks.
On 2019-03-06 16:02:07
Used to deburr the product.
As corners are hit, consumption is severe, so it is helpful to be cheap.
Because the grain size and size are abundant, I think that it is good to use properly.
On 2019-03-04 07:57:18
It was good to be able to purchase very reasonable. We were satisfied with product, packing, correspondence all.
Black skin removal
On 2019-02-22 03:12:16
We purchased for trial to drop black skin of steel materials.
For now, the purpose is fulfilled.
On 2019-02-05 09:09:12
It was cheap. Performance is enough. I am satisfied. I did a good shopping.
Polishing in the cylinder
On 2019-01-04 18:11:00
Recently, the idle rotation of 6 mm has increased. There may be a bad condition.