The reviews are automatic translation.
Determine the hole diameter.
On 2019-02-18 16:51:08
Now, I have made a drill of 100/1 and I can do dimensioning easily.
In particular, in the case of a small diameter, it is not possible to drill a hole, but use a drill with a comma minus 1 and then dimension with this drill.
On 2018-12-21 18:12:50
There is no problem with the product, I want you to offer cheaply the product of this performance with a monotaro original.
SUS, aluminum drilling processing
On 2018-04-16 19:41:45
Blade holding is well saved.
Previously I used a regular drill
During SUS processing, I had trouble holding the blade.
Drill processing requiring subtle clearance
On 2016-11-15 18:18:36
Shank diameter, abundance of size, price, performance, all are satisfactory.
With parts making of SUS 304 · · ·
On 2015-02-23 22:46:30
After buying it last week, I set it in a rechargeable hand drill and drilled hard stainless steel (SUS 304), but I made it possible to break two holes so as not to break. From long ago, this hand drill was sharpening the teeth several times on the way. This drill was able to open a hole of 1.5 mm even when cutting fluid was not applied. Currently it is possible to open SUS 304 material with a drilling machine without problems with a hole of 1.2 mm. Even if you look at the condition of the use of teeth, it seems to be possible to use until breakage if you do not cut cutting fluid! Later, I will also challenge the hole of SUS 316 ~
Drilling of stainless steel
On 2014-10-10 16:17:57
Because thinning is done, I feel good.