Customer Reviews of Magnetic Holder Plate
The reviews are automatic translation.
Showing 1 - 18 of 18 Reviews
Positioning of machine tool
On 2018-07-03 08:05:54
The magnetic force is so strong that it is small and difficult to peel off by hand. Satisfied.
I am using it for welding
On 2018-01-22 17:13:04
I use it when welding at right angle when welding Very useful
Misalignment of processing jig
On 2017-08-18 23:22:31
There was no perpendicular at the magnet attracting surface ... I tried to use it to stick the attachment base to the table, but I bought it barely even if I saw it visually. That part is disappointing because that part is troubled if precision is not guaranteed. I use right now by re-arranging my right angle. It is cheap and affordable so it will be purchased again if you reprint right angle.
During machine maintenance
On 2017-05-01 15:25:18
Magnetic force is also strong, easy to switch, use completely without problems.
Fixing of goods at the time of temporary attachment
On 2017-04-18 12:56:58
When I bought it four years ago, ON / OFF did not work properly, I was using it all the time in ON state and I was giving up on something like this, but when I bought it again this year, I turned ON / OFF worked perfectly. I noticed that what I bought four years ago was a defective item. Sorry!
During machine maintenance
On 2017-02-18 23:54:24
It is very small, but there is enough magnetic force. There is not astringent in the moving part. I would like to use it carefully.
Use desk NC milling machine (engraving machine) to fix work
On 2016-11-08 11:33:48
It is an additional review. I bought eight pieces in two. All the display boards were peeled off. Also, 8 pieces of resin parts inside the knob side cracked, some things did not move with one hand seems to be a solvent crack due to grease, selection of the shape, material and grease inside is incorrect I think. We made all the internal resin parts again with Duracon and changed to silicone grease, but now it is possible for the general person to be troubled because we can not do such a thing.
Welding (temporary fixation)
On 2016-09-29 18:58:00
ON OFF is a little hard. Magnetic force was strong for this small size so ok
Attach jigs or brackets for accessories to the M5 tap and work on iron table by suctioning it. For example, it is convenient to use for soldering printed circuit boards.
On 2016-05-03 19:45:08
Adsorption power is very strong, small, so easy to use, I am satisfied.
On 2015-12-16 14:58:33
Compact and easy to use. It can be used even in a narrow place
Accuracy measurement of machine tool
On 2014-09-14 22:53:30
There is no problem with the finish of the seat and the adsorption power of the magnet. I think that it is the best as cost effectiveness.
As a pedestal for fixing the work to the engraver
On 2013-12-24 10:12:23
The M5 screw hole can be used up to about 5 mm deep, and if it is tightened further, the inside magnet will be locked. By effective thread depth, I was worried when buying, I think that you can display it in advance. (Although the result was OK for our purpose of use,) Also, not only on the bottom but also on the back, the ON-OFF of the magnet was effective, it was perfect for this use. On the other hand, although I have not used it for several days, 2 of 4 of the ON / OFF display nameplates are peeling off from the upper right corner. It seems that pretreatment before sticking is insufficient. Also, I think that even if the nameplate is made a little smaller, even with a corner that is easy to peel off, it will not be fingers etc. I hope it improves.
On 2013-06-20 10:53:14
The price is reasonable. Since major manufacturers products are quite expensive, I think that it is good to choose frequency of use and place of use.
As a substitute for provisional fixation of small equipment
On 2013-06-06 22:57:41
It is used for the fixing board of LED lighting, temporary attachment of attachment listening and so on. Normal magnets are too large and inconvenient to carry, but they are handy with an affordable size.
Sheet metal welding
On 2012-04-13 14:30:56
It is used for positioning during welding (1.0 to 4.5 of spc). I will remove it temporarily. I also like the strength of magnetic force because it is easy to use and can switch on and off. I am using it in combination with not being a mini. It is also recommended for price.
Fixation of welding workpiece
On 2012-04-02 16:08:13
It might be a good idea to have a stronger suction power, but for now, it is perfect.
Work tools for shipyards
On 2012-01-11 13:01:20
I hope that the reduction of magnetic force due to heat is small compared with conventional magnets. It is still in a state that I have just started using it and I can not tell how much effect it is. If you use it in full swing, hundreds are required, so I'm expecting it.
Used to hold down when marking steel from film
On 2011-03-03 20:55:06
Working efficiency is good because it is light and sticky
Customers Who Viewed This Item Also Bought
36.99 - 339.99 SGD
52.99 - 67.99 SGD
56.99 - 199.99 SGD
7.99 - 71.99 SGD
11.99 - 109.99 SGD
119.99 - 139.99 SGD
11.99 - 69.99 SGD
38.99 - 209.99 SGD
92.99 - 129.99 SGD