Customer Reviews of Oil Sheet, Paper Packing
The reviews are automatic translation.
Showing 1 - 20 of 47 Reviews
Used for clutch cover
On 2018-12-03 16:40:03
Although it is easy to process, it is easy to process, but it is necessary to pay attention because it is cheap, I think that it is better to buy things that are surface treated if you are strongly hoping for complete sealing.
As a spacer of a folding bike.
On 2018-09-06 08:55:48
I used it as a countermeasure against squeaking of the handle part of Dahon Mu.
Disassembly repair of gear pump
On 2018-04-19 10:00:51
Recently, I did not use it for automobile, so I was in trouble because there was not at home center. It was very helpful to cut easily with scissors.
Maintenance of old tillers
On 2018-04-17 23:10:24
In order to repair the old tiller of KUBOTA 's diesel engine, I purchased it and mounted it by modeling. The manufacturer had finished selling, and other gasket seats were expensive because it was expensive. I think that it is good so far since there is no problem.
Instead of the gasket of the driving part of the scooter
On 2018-01-12 11:11:11
I waste it when I changed the gasket of the scooter so I took out the mold and cut it out and used it instead. It was a bit thick but managed somehow.
Use for gaskets of motorcycles!
On 2017-12-08 10:06:46
Although it is not compared with other gaskets, I wonder if there are problems in particular. This price with this size! It is the best in COSPA.
Measures against oil leakage
On 2017-11-15 19:51:10
I used it for the gasket of the crankcase cover, but it leaked out. I feel it is not suitable for use of parts that are immersed in oil with low viscosity.
Old car overhaul
On 2017-10-04 21:20:07
size! First of all, I found the same size in one company, but this price was 5 times frank then which is not quite a job I guess it's easy to process and I can not see any oil leaks
On 2017-10-03 17:30:02
We used it for oil pumps as it is currently without leakage
For dismantlement maintenance of the cultivator mission part
On 2017-08-29 12:06:41
Although the 20-year cultivator broke down, we asked the selling company to see it, but we refused the repair because there was a possibility that parts could not be obtained. I decided to repair it by myself and disassemble it, I understood that somehow it can be repaired by replacing the bearing and filling in the die-cast part etc. I decided to make it myself because the tremendous soil is entering and packing etc etc is not used, It was lacking about 5 cm in length and it was nice if there was a size of 50 x 100, but there is no choice but to make the missing part so that it will be the upper part of the mission so that the oil leak will not be greatly affected It is a solution. If you have a pair of scissors and a cutter knife, you can work but you can easily make a hole punching together. I made it 1 mm thick, but it may be easier to work with 0.5 mm ones. Now we can also get these parts so we can repair by yourself. Because I was told that it may take about 30,000 yen even if I can repair it as I asked for repair, so I spent money on tools etc for that. My DIY school is very pleased.
Hand electric electric
On 2017-07-11 19:50:08
It is an oil sheet packing like a cardboard. It is enough with other than
Motorcycle engine packing
On 2017-03-01 18:24:29
Processing such as packing varnish is necessary because there is no surface processing, but if it processes it with optional packing varnish, it is satisfactory with big size packing enough to use it.
Car maintenance (Sunday mechanic)
On 2017-02-08 23:06:45
It is used for making packing. I am sorry to make it cheaply.
Packing for engine assembly
On 2017-02-07 22:12:21
It is glad that the thickness, hardness is only the packing that I desired.
For motorcycle gasket
On 2017-01-23 20:26:41
Because of the large size you can create quite a lot of gaskets. As long as you see the reviews of other people, we are expecting that quality is no problem.
Used as crankcase cover gasket for scooter (address V 125 S).
On 2016-09-29 22:43:01
If you buy a crankcase cover gasket straight, it costs about 1500 yen per sheet. Cut out using this all seat and use it, you can make three gaskets for one piece. If you make three, 113 yen per one! It is! Quite economical! It is! Although it is not actually attached to the crankcase cover, it seems that it seems that it can be used without problems when reviewing other people.
Wagon R MC21S AT Oil pan installation gasket was made by yourself
On 2016-09-29 12:00:20
AT oil pan regularly installs with a sealant, but since it is hard to handle for amateurs, I installed my own gasket and installed it (I made it by my old car etc) It was pleased by my acquaintance. Monotaro san is inexpensive to purchase the seat can be saved.
Maintenance of the motorcycle
On 2016-09-10 19:55:40
I used it for the mission case of the motorcycle, but since the oil seeped out even after three iterations, is not suitable for the place where the oil is soaked? I felt.
On 2016-08-23 16:41:17
The seal is hard to peel off, and the adhesive remains.
On 2016-08-02 17:40:32
I think that it is of sufficient quality. Maintenance cost can be reduced.
Customers Who Viewed This Item Also Bought
SIBATA SCIENTIFIC TECHNOLOGY
5.99 - 119.99 SGD
43.99 - 49.99 SGD