The reviews are automatic translation.
On 2018-08-31 16:30:23
I want you to cut the triangle in the part to be caught.
If it is about this thickness the chuck will inevitably slip.
Drilling of iron plate
On 2018-07-17 15:36:44
I want a larger size! Chuck part is small
Shaft through hole
On 2018-06-08 16:17:49
Purchased for the through hole of the shaft of the rotating shaft.
It is really helpful to get inexpensively in a few days.
I also use PB drill sharpener to polish the blade, but since it does not correspond to M20, think about a method to finish it cheaply at hand.
It would be great if you could have a large diameter sharpener on PB if possible.
On 2018-05-04 15:18:53
The price was cheap, sharpness was good, I think I will also buy it,
On 2018-03-16 21:08:26
I used it for drilling 9 mm steel plate.
I think that there is no problem with sharpness, it is cheap and good product.
Since we only use 4 holes, the durability is now evaluated.
Motorcycle Parts Processing
On 2018-03-05 15:40:19
It is good that it is inexpensive and it is inexpensive and can be used without being used frequently.
When there are no schedule of use only several times, it is saved when there is an inexpensive product of the monotaro brand.
This time I just wanted to open a hole so it was satisfactory as I could use without problems.
Iron sheet perforation operation
On 2018-02-09 20:33:14
It is the same as a maker item. I usually use it.
There are no drawbacks.
Production of parts
On 2018-01-19 14:50:06
I thought it was okay because the outer box was doing so much, but the contents were not problematic.
I can cut it well as usual.
i Machine repair
On 2017-12-01 23:44:11
It was a product only fitted to the drill chuck diameter, and it was not a thing with grooves or chamfereds for detention, like the main manufacturers.
When load is applied, it rotates idly, it takes time and effort for drilling work, in case of total consideration?
Though it seems that there is no particular problem as things as kiri ...
Color etc etc, create small articles
On 2017-09-26 14:28:05
Because it was about half price of home center
I bought it and tried it.
Until now I was scraping the stick with sandpaper
It is easy to clean up in the same way cleanly
I should have bought it sooner.
It is vs aluminum, but the sharpness is also good.
On 2017-08-15 16:47:10
The price is cheap! But the product is perfect.
This size tends to be pretty expensive
Easy price, strength is also helpful and saved
On 2017-07-18 16:07:06
I am satisfied with the cost.
It can be used for a hand drill and work has become easier.
Hole drilling for shaft
On 2017-06-02 17:40:56
The low price of the unique monotaro is very helpful and thankful but I was surprised to see the goods that arrived! It was a worn-out box (package) that I thought "this is really new?" It was already terrible. The product in the box seems to be okay .... worry…. It was a convincing commodity if it is second hand.
Used during machine repair work.
On 2017-04-10 15:28:56
With a drill on hand, you can catch only up to φ13, so you need a snout.
Drilling the step holder
On 2017-01-13 14:53:29
It was a size called 16 mm, but the cutting ability was high and the finish was beautiful and I was very satisfied.
Drilling of stainless steel
On 2016-11-08 13:27:02
I used it in drilling of stainless steel, but there was not any problem in particular. It was nice to purchase at a low price.
Part machining drilling
On 2016-09-30 11:13:44
It was a very good condition and it is very cheap.
Drill a hole in the iron plate
On 2016-02-29 23:03:38
The beginning person was able to break well, but it seemed to be a little early to cut off. But I think that I can be satisfied if I consider the price.
On 2015-10-07 18:19:43
Because the fixed part of the chuck remains round, I would like to have 3 slits or slippery rice balls
On 2015-08-13 15:41:20
I think it is normal.