Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

All Products

Sort by:
Showing 1 - 30 of 238 Results
Show: 30 60 90
VIEW: Grid View List View
Air Angle Grinder
YANASE
5.00(1)
269.99 SGD
ADD TO CART
Exhaust Direction: Side, Size (mm): (Disk) phi58x10, Air Consumption (m3/min): 0.6, Working Pressure (MPa): 0.44 - 0.58, Revolution (min-1[r.p.m]): 22000, Weight (g): 530, Overall Length (mm): 140, Accessories: TOP minidisk #40, #60, #120 1 each regulator, coupler, replacement wrench, Allen wrench, each one
Category Work Tools, Electric-Pneumatic Tools > Pneumatic Tools > Grinder > Angle Grinders
Felt Polishing Wheel With Shaft, Hexagonal Shaft For Impact Use
YANASE
5.00(8)
7.99 - 12.99 SGD
Caution: Please use the coated abrasive (abrasive wax)., Hexagon Opposite Side(mm): 6.35
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Paper With Axis
Cup Brush With Shaft Stainless Steel
YANASE
8.99 SGD
ADD TO CART
Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish., Metal Fitting Diameter (mm phi): 50, Outer Diameter (phi mm): 65, Material (Brush Part): Stainless wire, Trim Length (mm): 25, Wire Diameter (phi mm): 0.28, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Cup Type Brushes
Cup Brush With Brass Axis
YANASE
2.67(3)
8.99 SGD
ADD TO CART
Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish., Metal Fitting Diameter (mm phi): 50, Outer Diameter (phi mm): 65, Material (Brush Part): Brass wire, Trim Length (mm): 25, Wire Diameter (phi mm): 0.28, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Cup Type Brushes
Felt Shank Wheel
YANASE
4.11(9)
9.99 SGD
Purpose: Mirror finish polishing of metals such as steel, stainless steel.Sisal wheel with axis, cotton wheel after polishing.Wiping metals, bringing out the shine and luster., Width (mm): 25, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Lapping Film Sheet
YANASE
5.00(2)
45.99 - 46.99 SGD
Category Cutting Tools, Abrasives > Abrasives > Hand Grinding > Polishing Sheets > Polishing Sheet With Abrasive Material
Sus304 Foil Brush With Stainless Axis
YANASE
4.67(3)
8.99 SGD
ADD TO CART
Purpose: Suitable for narrow grooves and polished, cleaned and surface finish.Takes off rust and dirt, and can be used on a flat surface, Metal Fitting Diameter (mm phi): 38, Outer Diameter (phi mm): 75, Material (Brush Part): Stainless wire, Wire Diameter (phi mm): 0.25, Maximum Rotation Speed (min-1[r. p.m]): 4500, Thickness (mm): 13, Shaft Diameter (phi mm): 6, Application: For the polishing of stainless steel, aluminum products.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Wheel Brushes, Flat Brushes
Plate Mounted Grinding Disc
YANASE
3.00(6)
7.99 - 8.99 SGD
Compatible Materials: Iron, stainless steel, aluminum, stone, glass, Outside Diameter x Bore Diameter (phi mm): 100x15
Category Cutting Tools, Abrasives > Abrasives > Grinder Grinding Wheel > Elastic Bonded Mounted Pointed
TOP DISK (SILICON CARBIDE)
YANASE
4.67(3)
6.99 SGD
Number of Blades: 90, Maximum Rotation Speed (min-1[r. p.m]): 13000, Hole Diameter (phi mm): 15, Diameter (phi mm): 100
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
Felt Shank Wheel, Cylindrical
YANASE
4.00(1)
5.99 - 6.99 SGD
Caution: Please use the coated abrasive (abrasive wax)., Purpose: Mirror-finish polishing of metals.Mirror finish polishing for after polishing on hemp and cotton buffing wheels.Wiping metals, bringing out the shine and luster.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Mushroom buff
YANASE
10.99 - 68.99 SGD
Purpose: Buff for specular finish, Color: White, Shaft Diameter (phi mm): 6, Material: Cotton
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Wool Buff
YANASE
5.00(1)
26.99 - 45.99 SGD
2014 TRUSCO Published Page: 2-1575
Category Cars, Truck Equipment > Sheet Metal, Paintings > Polishing > Buffs > Buff > Woolbuck > with Intermediate Sponge
Sponge Buff Phi125
YANASE
4.67(3)
19.99 - 20.99 SGD
2014 TRUSCO Published Page: 2-1575
Category Work Tools, Electric-Pneumatic Tools > Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Buffs
Flap Wheels With Shaft, 3 Mm Shaft
YANASE
4.75(4)
65.99 - 74.99 SGD
Shaft Diameter (phi mm): 3
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Flap Wheel
Impact Mushroom Buff, Hex Shank
YANASE
4.67(3)
11.99 - 21.99 SGD
Hexagon Opposite Side(mm): 6.35
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Restore Sander
YANASE
5.00(1)
39.99 SGD
Caution: it can not be used in restore sander only Please use with the special pad (not included)., Purpose: Rust and paint removal work.Takes off sanding scratchesRemoval of spot welding and deburring., Maximum Speed (min-1[r. p.m]): 13000, Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15, Abrasive Material: Aluminium oxide
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
Shank Wheel Brush Mounted
YANASE
5.00(1)
7.99 SGD
ADD TO CART
Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish., Metal Fitting Diameter (mm phi): 50, Outer Diameter (phi mm): 65, Material (Brush Part): Steel wire, Trim Length (mm): 25, Wire Diameter (phi mm): 0.28, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Cup Type Brushes
White Buffing Compound
YANASE
1.00(1)
30.99 SGD
ADD TO CART
Purpose: Hard metal mirror luster finish. Stainless steel and chrome metal hard plating surface., Hard metal mirror luster finish. Stainless steel and chrome metal hard plating surface., 2014 TRUSCO Published Page: 2-1810, Outside Dimension (depth D x Width W x Height H) (mm): 130x55x40, Weight (g): 500, 500, TRUSCO Part Number: 405-0177, Specification: for buff, bias cotton buff, emery buff, Buff/bias cotton buff, emery wheel
Category Cutting Tools, Abrasives > Abrasives > Hand Grinding > Buffing and Polishing Conpounds > No Chrome
A Wheel Brush With A Steel-Wire Axis
YANASE
3.00(1)
6.99 SGD
ADD TO CART
Purpose: Suitable for narrow grooves and polished, cleaned and surface finish.Takes off rust and dirt, and can be used on a flat surface, Metal Fitting Diameter (mm phi): 36, Outer Diameter (phi mm): 75, Material (Brush Part): Steel wire, Wire Diameter (phi mm): 0.25, Maximum Rotation Speed (min-1[r. p.m]): 4500, Thickness (mm): 13, Shaft Diameter (phi mm): 6, Application: For Steel rust, peeling paint, before plating coating substrate polishing, press cutting, deburring.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Wheel Brushes, Flat Brushes
Sg Cotton Disks
YANASE
36.99 - 41.99 SGD
Purpose: Final finishing of metal before mirror finishing., Maximum Speed (min-1[r. p.m]): 8000, Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Felt Disk
SG Sisal Disc
YANASE
5.00(2)
26.99 SGD
ADD TO CART
Purpose: Glazing iron and stainless. Pre process of mirror finish., 2014 TRUSCO Published Page: 2-1801, Maximum Speed (min-1[r. p.m]): 8000, Outer Diameter (phi mm): 100, Maximum Operating Speed (m/s [m/min]): 42[2520], Maximum Rotation Speed (min-1[r. p.m]): 8000, Hole Diameter (phi mm): 15, Thickness (mm): 13, TRUSCO Part Number: 359-9043
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Felt Disk
Mugen Axial Flap
YANASE
41.99 - 57.99 SGD
Width (mm): 25, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Flap Wheel
Grinding Wheel, GP Disk
YANASE
53.99 - 90.99 SGD
Maximum Operating Speed (m/s [m/min]): 63
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
Diamond Bur Cylinder
YANASE
5.00(1)
12.99 - 16.99 SGD
Shank Diameter (phi mm): 3, Overall Length (mm): 45, Grain Size: 140
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Shank Mounted Diamond Grindstone
Diamond Burr, Cone Shape, Round Tip
YANASE
4.00(1)
13.99 - 18.99 SGD
Shank Diameter (phi mm): 3, Overall Length (mm): 45, Grain Size: 140
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Shank Mounted Diamond Grindstone
Sisal Disk
YANASE
97.99 SGD
ADD TO CART
Caution: Use Buffing Compound Bar Green on sisal disc surface., Purpose: The finishing and polishing of stainless steel, aluminum, and other materials. For taking off burns. Mirror finish. Grinding before cotton disk grinding, Maximum Operating Speed (m/s [m/min]): 63, Maximum Rotation Speed (min-1[r. p.m]): 8000, Hole Diameter (phi mm): 15, Diameter (phi mm): 100
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Felt Disk
Unichrome belt (hard type)
YANASE
5.00(2)
83.99 - 85.99 SGD
Width x Overall Length (mm): 60x265
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Belt Polishing
Shank Cotton Wheel, Finishing
YANASE
1.00(1)
69.99 - 81.99 SGD
Purpose: Perfect for mirror finishes Leaves a beautiful finish after the sisal wheels., Maximum Operating Speed (m/s [m/min]): 16, Application: To the final polishing before a felt disk.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
regy soft S
YANASE
3.00(2)
34.99 SGD
Purpose: it grind the iron, the stainless steel, the aluminum and the molding, Maximum Operating Speed (m/min): 67, Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15, Compatible Tool: Disc grinder, Abrasive Material: AC, Thickness (mm): 3
Category Cutting Tools, Abrasives > Abrasives > Grinder Grinding Wheel > Flexible Wheel
Happy TOP disk phi 180
YANASE
4.50(2)
18.99 - 19.99 SGD
Maximum Rotation Speed (min-1[r. p.m]): 8000, Hole Diameter (phi mm): 22, Diameter (phi mm): 180
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk

1 2 3 4 5 6 7 8 Next

Yanase Related Products

Related Products