Buy more than* S$200* and get FREE SHIPPING
Note
Due to the maintenance, we will close our website on June/22/2019 2:00-2:30am JST.
All customers might not shop on our website during the time. Thank you.

All Products

Sort by:
Showing 1 - 30 of 1,166 Results
Show: 30 60 90
VIEW: Grid View List View
Cup Type Oil Filter Wrench
KYOTO TOOL (KTC)
24.99 - 38.99 SGD
Plug Angle (mm): 9.5, 9.5, 2015 Trusco Published Pages: 2 0934, Caution: Since the adaptation of the main use engine may vary by type of vehicle, model year, engine type, please check the outer diameter of the oil filter., Since the adaptation of the main use engine may vary by type of vehicle, model year, engine type, please check the outer diameter of the oil filter., Since the adaptation of the main use engine may vary by type of vehicle, model year, engine type, please check the outer diameter of the oil filter., Since compatible use of the main engine may change according to the form of a vehicle type, a model, and an engine. Please confirm the outside diameter of an oil filter.
Category Cars, Truck Equipment > Maintenance Tools and Storage > Automotive maintenance special tools > Engine Related > Oil Filters Related > Cup Type Oil Filter Wrenches
Ratchet Driver Series
KYOTO TOOL (KTC)
2.86(7)
59.99 - 75.99 SGD
2015 Trusco Published Pages: 2 0407
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Drivers, Bits > Drivers > Ratchet Drivers
Pantograph Jack
KYOTO TOOL (KTC)
45.99 - 67.99 SGD
Accessories: handle, Handle, 2014 TRUSCO Published Page: 3-2531, 2015 Trusco Published Pages: 3 2286, Caution: Do not use with a load force greater than the specified capacity. Do not enter your body or a part of your body below the object lifted by this jack., Do not use with a load force greater than the specified capacity. Do not enter your body or a part of your body below the object lifted by this jack., Do not use with a load force greater than the specified capacity. Do not enter your body or a part of your body below the object lifted by this jack., Please do not use a load higher than capacity. Do not go under the raised jack.
Category Cars, Truck Equipment > Garage Equipment, Transportations > Jack and Rigid racks > Pantograph Jack > Manual
Door Gate Stopper Set
KYOTO TOOL (KTC)
5.00(1)
96.99 SGD
ADD TO CART
Specification: Dedicated tool for fixing doors and rear gate opened, for sheet metal work and part replacement. Striker phi 10mm or less(Except automatic lock mechanism vehicle.), Set Contents: Door stopper (AP902A), gate stopper (AP902B), Doorstop (AP902A), gate stopper (AP902B), Overall Length (mm): Doorstop: 190 / gate stopper: 540 over 740, Doorstop: 190 / gate stopper: 540-740, Weight (g): 700 (door stopper 200 / gate stopper 500), 700 (200 doorstop / gate stopper 500), Purpose: For work with sheet metal of the door or rear gate., For work with sheet metal of the door or rear gate., For work with sheet metal of the door or rear gate.
Category Cars, Truck Equipment > Sheet Metal, Paintings > Sheet Metals > Sheet Metal Tools / Equipments > Door Supporter
Inspection hammer
KYOTO TOOL (KTC)
4.11(9)
21.99 - 38.99 SGD
2014 TRUSCO Published Page: 2-0737, 2015 Trusco Published Pages: 2 0770
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Hammers, Punches, Bars, Levers, Engraving Tools > Hammers > Inspection Hammer
Digital Ratchet With An Exclusive Resin Case
KYOTO TOOL (KTC)
4.40(5)
289.90 - 489.90 SGD
Dimensions T2 (mm): 36, 36, 2015 Trusco Published Pages: 1 1234, Purpose: Can be used for any work requiring torque managements for industrial machinery, analytical instruments used for automobile and other various manufacturing, architecture, civil engineering, engineering, building maintenance and other maintenance., Can be used for any work requiring torque managements for industrial machinery, analytical instruments used for automobile and other various manufacturing, architecture, civil engineering, engineering, building maintenance and other maintenance., Can be used for any work requiring torque managements for industrial machinery, analytical instruments used for automobile and other various manufacturing, architecture, civil engineering, engineering, building maintenance and other...
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Torque Wrenches, Torque Drivers > Torque Wrenches > Digital Type
Super long straight closed wrench
KYOTO TOOL (KTC)
24.99 - 119.90 SGD
Specification: Power fit, 2014 TRUSCO Published Page: 2-0280, 2015 Trusco Published Pages: 2 0286
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Box End Wrench > Double Ring Wrenches
Digital Ratchet Monkey Type
KYOTO TOOL (KTC)
4.25(4)
399.90 - 589.90 SGD
Specification: Number of set torque / (pre-set mode) 5, (admission decision mode) 1, Dimensions B (mm): 69, 69, Dimensions T1 (mm): 14.5, 14.5, Dimensions T2 (mm): 36, 36, 2015 Trusco Published Pages: 1 1235
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Torque Wrenches, Torque Drivers > Torque Wrenches > Digital Type
Replacement Screwdriver, Bit
KYOTO TOOL (KTC)
2.00(1)
24.99 SGD
ADD TO CART
TRUSCO Part Number: 373-7501, 373-7501, Set Contents: Body, bit (+ No.2 overall length 22mm), The main body, bits (length 22 mm +No.2), Weight (g): 60, 60, Blade Shape: +, Material (Bit): Cr-V, Cr-V, Head Width (mm): 27, 2014 TRUSCO Published Page: 2-0405, 2015 Trusco Published Pages: 2 0417, Caution: Please note to operate the right and left switch lever correctly, to avoid damages and idling., Please note to operate the right and left switch lever correctly, to avoid damages and idling., Please note to operate the right and left switch lever correctly, to avoid damages and idling., Since it may lead to breakage or idling, please perform lever handling replacement on both sides properly., Please note to operate the right and left switch lever correctly, to avoid damages and idling., Pleas...
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Drivers, Bits > Drivers > Ratchet Drivers
Deep Socket Set
KYOTO TOOL (KTC)
5.00(1)
119.90 - 229.90 SGD
Specification: Power fit 21st century version tool , Outlet Corner (sq.): 9.5, 9.5, 2014 TRUSCO Published Page: 2-0085, 2015 Trusco Published Pages: 2 0087
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Sockets, Socket Wrenches > socket > Socket for Socket Wrench > Long Type (Deep Socket)
Super long straight ring wrench set
KYOTO TOOL (KTC)
5.00(4)
87.99 SGD
ADD TO CART
Specification: Power fit, TRUSCO Part Number: 373-6083, 373-6083, Set Contents: Ultra-Long Straight wrench (M160 over 8x10,12x14,17x19), SUPER Long straight box wrench(M 160-8 X 10, 12 X 14, 17 X 19), Weight (g): 545, 545, 2014 TRUSCO Published Page: 2-0280, 2015 Trusco Published Pages: 2 0286
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Box End Wrench > Double Ring Wrenches
Straight long glasses wrench
KYOTO TOOL (KTC)
19.99 - 43.99 SGD
Specification: Power fit, 2014 TRUSCO Published Page: 2-0279, 2015 Trusco Published Pages: 2 0285
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Box End Wrench > Double Ring Wrenches
Tool Bag
KYOTO TOOL (KTC)
38.99 SGD
ADD TO CART
Material: Body: nylon body back: PVC edge, tape: PP, Body: nylon Body: PVC Ulla Futch, pp tape, Color: black, Black, Weight (g): 270, 270, Dimensions (Width x Length) (mm): 490 x 260 (during deployment, except belt, the flap), 490 X 260 (except for belts, flap at deployment time)
Category Motorbikes, Bicycle Supplies > Motorcycle Supplies > Maintenance Tools > Car Body Association
Combination wrench
KYOTO TOOL (KTC)
2.50(4)
13.99 - 199.90 SGD
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Combination Wrenches (Spanners)
Disc Brake Piston Tool
KYOTO TOOL (KTC)
4.25(4)
96.99 - 159.90 SGD
Category Cars, Truck Equipment > Maintenance Tools and Storage > Automotive maintenance special tools > Brake and Suspension Related > Damping > Disc Brake Spreader
Wrench rack ( for spanner / glasses wrench / combination wrenches)
KYOTO TOOL (KTC)
4.25(4)
22.99 SGD
ADD TO CART
TRUSCO Part Number: 373-8591, 373-8591, Set Contents: / Base (180x140x5.5mm) 3 sheets / Rakkupin A small-size (up to about 19x21) 3 this seat four / Rakkupin B for large size (about 19x21 over 24x27) 1 present for the two-seat two / Rakkupin C small size four 4 / Pin 4 / joint is multiplied, - (180 X 140 x 5.5 mm) base, 3 pieces Wrapping A, for small size (until approx. 19 x 21) can hang 3 items x 4 pieces Wrapping B, for large size (approx. 19 x 21 to 24 x 27) can hang 2 items x 2 pieces Wrapping C, for small size, can hang 1 it, 2014 TRUSCO Published Page: 2-1099, 2015 Trusco Published Pages: 2 1205, Caution: Tools are not included., Tools are not included., Tools are not included., Tools not included, Tools are not included., Tools are not included., Tools are not included., Tools n...
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Tool Storage > Wrench Racks
Brake-Shoe Adjusting Tool
KYOTO TOOL (KTC)
4.80(5)
19.99 - 58.99 SGD
Category Cars, Truck Equipment > Maintenance Tools and Storage > Automotive maintenance special tools > Brake and Suspension Related > Damping > Brake Adjustment Tools
The Torque Wrench Exclusive for Wheel Nuts
KYOTO TOOL (KTC)
4.33(6)
259.90 SGD
ADD TO CART
Overall Length (mm): 423, 423, Outlet Corner (sq.): 12.7, 12.7, Setting Torque (Nm): 103, 103, Purpose: Single-function type torque wrench for car wheel nuts. Only right rotation for tightening. Not apply for reverse screws. For Toyota, Daihatsu vehicles., Single-function type torque wrench for car wheel nuts. Only right rotation for tightening. Not apply for reverse screws. For Toyota, Daihatsu vehicles., Single-function type torque wrench for car wheel nuts. Only right rotation for tightening. Not apply for reverse screws. For Toyota, Daihatsu vehicles., Single purpose type torque wrench exclusive for automotive wheel nuts Suitable for right-turn tightening direction only. (Does not apply to the reversed type screw) Toyota and Daihatsu vehicles, Caution: Follow the specified to...
Category Cars, Truck Equipment > Maintenance Tools and Storage > Measurement items > Torque Wrenches > Pre-set Type
Valve Spring Compressor
KYOTO TOOL (KTC)
329.90 SGD
ADD TO CART
Application: Sucking/absorbing exhaust valve service of 4 cycle engines (valve spring removal and re-installation). 4 Size attachment lets most of the models. Attaching portions can be replaced one-touch, opening of the removable Cotter smoothly widely., Set Contents: Body attachment (MCVU over A17, A21, A25, A29), -Body Attaching portion (MCVU-A16, A20, A24, A28), Weight (kg): 1.4, 1.4, Length L(mm): Body: 290 over 420, main Body: 290-420, Height H (mm): Body: 172, main Body: 172
Category Motorbikes, Bicycle Supplies > Motorcycle Supplies > Maintenance Tools > Engine and Drive Association > Valve Spring Compressor
Oil Pan Seal Cutter
KYOTO TOOL (KTC)
87.99 SGD
ADD TO CART
Weight (g): 180, 180, Dimensions L (mm): 78, 78, Dimensions D (mm): 70, 70, Dimensions S1 (mm): 48, 48, Dimensions S2 (mm): 24, 24, Purpose: For removing the oil pan, cutting of seal packing., For removing the oil pan, cutting of seal packing., For removing the oil pan, cutting of seal packing., Caution: Please wear protective glasses when working., Please wear protective glasses when working., Please wear protective glasses when working.
Category Cars, Truck Equipment > Maintenance Tools and Storage > Automotive maintenance special tools > Engine Related > Seals Related > Seal Inserters
Neck extension bar
KYOTO TOOL (KTC)
15.99 - 77.99 SGD
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Sockets, Socket Wrenches > Attachments > Extension Bars
Plug Wrench Socket
KYOTO TOOL (KTC)
32.99 SGD
Plug Angle (mm): 9.5, 9.5, 2014 TRUSCO Published Page: 2-0884, 2015 Trusco Published Pages: 2 0936, Caution: Do not turn with a wrench on the outer periphery. (B3A-14SP), Do not turn with a wrench on the outer periphery. (B3A-14SP), Do not turn with a wrench on the outer periphery. (B3A-14SP)
Category Cars, Truck Equipment > Maintenance Tools and Storage > Automotive maintenance special tools > Electrical System > Spark Plug Related > Plug Wrench > Plug Wrench Socket
12.7sq Socket Wrench Set
KYOTO TOOL (KTC)
2.50(2)
489.90 SGD
ADD TO CART
Specification: Power Fit 21 century version tool, TRUSCO Part Number: 307-3521, 307-3521, Set Contents: / Socket (hex) (B4 over 08,10,11,12) / socket (twelve square) (B4 over 13W, 14W, 15W, 16W, 17W, 18W, 19W, 21W, 22W, 23W, 24W, 26W, 27W, 29W, 30W, 32W) / ratchet handle (BR4E) / spinner handle (BS4E) / extension bar 75 (BE4 over 075), 150 (BE4 over 150) / , Socket (Allen) (B4-08, 10,11,12) ? socket (dodecagonal) (B4-13W, 14W, 15W, 16W, 17W, 18W, 19W, 21W, 22W, 23W, 24W , 26W, 27W, 29W, 30W, 32W) ? ratchet handle (BR4E) ? spinner handle (BS4E) ? extension bar 75 (BE4-075), 150 (BE4-150) <b, Weight (kg): 5.8, 5.8, Dimensions (Length L x Width W x Height H) (mm): Resin molded tray: 445x190x60, Resin molded tray: 445 x 190 x 60, Outlet Corner (sq.): 12.7, 12.7, 2014 TRUSCO Published P...
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Sockets, Socket Wrenches > Wrench Sets
Spanner set (inch)
KYOTO TOOL (KTC)
119.90 SGD
ADD TO CART
TRUSCO Part Number: 373-8868, 373-8868, Set Contents: / Wrench (inch) (S2 over 5 / 16x3 / 8,13 / 32x1 / 2,1 / 2x9 / 16,19 / 32x11 / 16,5 / 8x3 / 4,25 / 32x7 / 8) / holder (EHS-1 ), ? Spanner (inch) (S 2-5/16 x 3/8, 13/32 x 1/2, 1/2 x 9/16, 19 / 32 x 11 / 16, 5 / 8 x 3 / 4, 25 / 32 x 7 / 8) ? Holder (EHS-1), Weight (g): 700, 700, 2014 TRUSCO Published Page: 2-0304, 2015 Trusco Published Pages: 2 0311
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Wrenches > Double Open End Wrenches
Mini Hammer
KYOTO TOOL (KTC)
2.00(1)
28.99 - 32.99 SGD
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Hammers, Punches, Bars, Levers, Engraving Tools > Hammers > Special Hammer
T Form Hexagonal-Bar Wrench
KYOTO TOOL (KTC)
6.19 - 12.99 SGD
2014 TRUSCO Published Page: 2-0487, 2015 Trusco Published Pages: 2 0504, Caution: Please apply force to the bolt rotation direction only. When applying force in a direction to move from the axis, the tip part may be damaged., Please apply force to the bolt rotation direction only. When applying force in a direction to move from the axis, the tip part may be damaged., Please apply force to the bolt rotation direction only. When applying force in a direction to move from the axis, the tip part may be damaged., Please add force to the bolt rotation direction.If force is applied when tipping the axis, damage may occur to the tip, Please apply force to the bolt rotation direction only. When applying force in a direction to move from the axis, the tip part may be damaged., Please apply force...
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Allen Wrenches > Single Products (Individual) > T Shape Handle Type
Spanner set
KYOTO TOOL (KTC)
3.25(4)
69.99 - 129.90 SGD
2015 Trusco Published Pages: 2 0310
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Wrenches > Double Open End Wrenches
Spanner
KYOTO TOOL (KTC)
7.29 - 96.99 SGD
Specification: 21st century version tool
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Wrenches > Double Open End Wrenches
Resin Handle T Type Tamper Proof Torques Driver
KYOTO TOOL (KTC)
4.33(3)
28.99 - 38.99 SGD
Specification: 21st century version, Blade Shape: IJIRI stop Torx, Material (handle): resin, 2015 Trusco Published Pages: 2 0436
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Drivers, Bits > Drivers > Grip Drivers
Ball point hex key wrench set
KYOTO TOOL (KTC)
5.00(1)
96.99 SGD
ADD TO CART
TRUSCO Part Number: 373-5010, Set Contents: Dihedral width (long side x short side) mm: 1.5 (53.5x13.5), 2 (60x14), 2.5 (62.5x17.5), 3 (68x23), 4 (76x29), 5 (85x33), 6 (96x38), 8 (108x44), 10 (122x50) ,holder, High-grade ball point L-shaped Allen wrench Standard HLD200-1.5/2/2.5/3/4/5/6/8/10, holder, Weight (g): 250, 250, 2014 TRUSCO Published Page: 2-0443, 2015 Trusco Published Pages: 2 0458, Caution: Since the ball point has a low limit torque, please note not to put too much force. The swing angle of the ball point differs from size and bolt variability. Please apply force to the bolt rotation direction only. When pulling up or pushing down there, Since the ball point has a low limit torque, please note not to put too much force. The swing angle of the ball point differs from size a...
Category Work Tools, Electric-Pneumatic Tools > Work Tools > Wrenches. Spanners > Allen Wrenches > Set Products > L Type Wrench Sets

1 2 3 4 5 6 7 8 9 10 ...39 Next

KTC Related Products

Related Products