Buy more than* S$200* and get FREE SHIPPING
---
*Notice*
Due to the maintenance, we will close our website from July 21,2018 10PM to July 22, 2018 4AM JST.
All customers cannot shop on our website during the time. Thank you.

All Products

Sort by:
Showing 1 - 30 of 432 Results
Show: 30 60 90
VIEW: Grid View List View
Insert
Sumitomo Electric Industries
4.62(8)
61.99 - 80.99 SGD
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
Heat Shrinkable Tubing, General Use, Transparent
Sumitomo Electric Industries
3.75(8)
8.99 - 16.99 SGD
Shrinking Temperature End (Degree C): 115, Length (m): 1, Color: Transparency, Material: Electron beam cross-linking soft flame-retardant polyolefin resin
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Heat-Shrinkable Tube W3F2
Sumitomo Electric Industries
31.99 - 87.99 SGD
Purpose: Waterproof treatment for large step electronic parts, treatment for wire bifurcation area, wire connection parts insulation protection, Ratio: 3:1, Shrinking Ratio (%): Inner diameter contraction rate / more than 60 Change in length rate / more than -15, Shrinkage Temperature: 115 deg C or more, Tensile Strength (MPa): Before aging / more than 10.4 After aging / more than 7.3 (158deg C x 7 days), Shrinking Temperature End (Degree C): 110, Shrinking Temperature Start (Degree C): 60, Insulation Breakdown Voltage (kV): Before aging /more than AC2.5 After aging /more than AC2.5 (158degreeC x 7 days, survival rates of 50% or more), Continuous Use Temperature (deg C): -55 - 125, Volume Resistivity (ohm cm): More than 1.0x1014, Elongation (%): Before aging / more than 200.4 After aging...
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
SUMIFLON Screw Joint Seal NS
Sumitomo Electric Industries
8.99 - 27.99 SGD
Heat-Resistant Temperature (deg C): -100 - 260, Tape Thickness (mm): 0.1, Caution: Do not use molten alkali metal since they may damage the chlorine trifluoride.* Make sure not to burn the reel and the screw seal because it will generate toxic gas., Application: The sealant for screw joints
Category Office, Tape, Cleaning Supplies > Tapes > Repair and Sealing Tape > Sealing Tapes
Heat-Shrinkable Tube F, Z
Sumitomo Electric Industries
6.99 - 41.99 SGD
Purpose: Insulation, protection and reinforcement of electric wire connections, wire terminals Binding and color identification of wire Protection and insulation resistor, capacitor, etc., Ratio: 2:1, Tensile Strength (MPa): Before aging /more than 10.4% After aging / more than 7.3% (136 degree c x 7 days), Shrinking Temperature End (Degree C): 90, Shrinking Temperature Start (Degree C): 60, Insulation Breakdown Voltage (kV): Before aging/more than AC2.5 After aging / more than AC2.5 (136 degree c x 7 days, survival rate more than 50%), Continuous Use Temperature (deg C): -55 - 105, Volume Resistivity (ohm cm): More than 1.0x1014, Elongation (%): Before aging /more than 200% After aging / more than 100% (136 degree c x 7 days), Withstand Voltage: Before aging/AC2.5kV x 60 seconds, withou...
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Chip VCGT-AG
Sumitomo Electric Industries
139.99 SGD
ADD TO CART
Conventional Manufacturer Model Number: VCGM220FAG, Breaker: with rants Pocky Type for aluminum , Nose Radius r (mm): 0.2, Relief Angle (degree): 7, Inscribed Circle Diameter (phi mm): 6.35, Cutting Blade Length (mm): 11.1, Hole Diameter (phi mm): 2.8, Thickness (mm): 3.18, Shape: 35 degree Rhombic, Material: H1
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > Diamond
Heat-Shrinkable Tube A
Sumitomo Electric Industries
4.40(5)
45.99 - 139.99 SGD
Purpose: Insulation, protection and reinforcement of electric wire connections, wire terminalsBinding and color identification of wireProtection and insulation resistor, capacitor, etc., Ratio: 1.5:1, Water Absorption Rate (%): (24 hours 23 deg C x) 0.10 below, Shrinkage Temperature: 115 deg C or more, Tensile Strength (MPa): 10.4 or more, Shrinking Temperature End (Degree C): 115, Continuous Use Temperature (deg C): -55 to 105, Volume Resistivity (ohm cm): 1.0x10 to the 16th or more, Elongation (%): 200% or more, Structure: Even, Specification: [Flammability] combustible
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Heat-Shrinkable Tube W3F2
Sumitomo Electric Industries
27.99 - 78.99 SGD
Purpose: Waterproof treatment for large step electronic parts, treatment for wire bifurcation area, wire connection parts insulation protection, Shrinkage Temperature: 115 deg C or more, Shrinking Temperature End (Degree C): 110, Shrinking Temperature Start (Degree C): 60, Length (m): 1.22, Color: Black
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Heat-Shrinkable Tube A
Sumitomo Electric Industries
4.99 - 6.99 SGD
Purpose: Insulation, protection and reinforcement of electric wire connections, wire terminals Binding and color identification of wire Protection and insulation resistor, capacitor, etc. Electric corrosion protection and regular corrosion protection of p, Ratio: 2:1, Water Absorption Rate (%): 0.10 (23 deg Cx 24 hours) or less, Shrinkage Temperature: 115 deg C or more, Tensile Strength (MPa): 10.4 or more, Incombustibility: Flammable, Shrinking Temperature End (Degree C): 115, Shrinking Temperature Start (Degree C): 75, Continuous Use Temperature (deg C): -55 - 105, Volume Resistivity (ohm cm): More than 1.0x1016, Elongation (%): 200% or more, Withstand Voltage: AC2.5kV x 60 seconds, without breakdown, Structure: One layer, Compatible Standard: Sumitomo Electric fine polymer specification...
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Heat-Shrinkable Tube A
Sumitomo Electric Industries
5.00(1)
3.99 - 6.99 SGD
Change in Length Rate (%): -15 Or more, Shrinkage Temperature: 115 deg C or more, Tensile Strength (MPa): 10.4 or more, Shrinking Temperature End (Degree C): 115, Shrinking Temperature Start (Degree C): 75, Length (m): 1, Specification: [Flammability] combustible
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Heat-Shrinkable Tube F, Z
Sumitomo Electric Industries
5.00(1)
119.99 - 399.99 SGD
Shrinking Temperature End (Degree C): 90, Color: Black
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Insert
Sumitomo Electric Industries
71.99 - 75.99 SGD
Relief Angle (degree): 0, Thickness Tolerance (mm): +/-0.13
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Negative Chip > Rhombus
Insert
Sumitomo Electric Industries
5.00(1)
71.99 - 76.99 SGD
Hole Diameter d1 (phi mm): 5.16, Thickness s (mm): 4.76, Blade Length l (mm): 12.9, Breaker: GU, Nose Radius r (mm): 0.8, Relief Angle (degree): 0, Thickness Tolerance (mm): +/-0.13, Inscribed Circle Diameter (phi mm): 12.7
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Negative Chip > Rhombus
Insert
Sumitomo Electric Industries
4.00(2)
78.99 - 109.99 SGD
Relief Angle (degree): 0, Inscribed Circle Diameter (phi mm): 9.525
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > triangle
Insert
Sumitomo Electric Industries
4.00(2)
83.99 SGD
Purpose: Finishing - for light cutting, Breaker Rake Angle (degree): 0, Corner Height Tolerance (mm): +/-0.025, Hole Diameter d1 (phi mm): 3.4, Thickness s (mm): 3.18, Blade Length l (mm): 11.0, Inscribed Circle Tolerance (mm): +/-0.025, Relief Angle (degree): 11, Thickness Tolerance (mm): +/-0.13, Egocentric: Left, Inscribed Circle Diameter (phi mm): 6.35, Grade: Class G
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > triangle
Insert
Sumitomo Electric Industries
99.99 SGD
Conventional Manufacturer Model Number: SFKN12T3AZTN, Relief Angle (degree): 25, Inscribed Circle Diameter (phi mm): 12.7, Cutting Blade Length (mm): 12.7, Tolerance: +/-0.075, Thickness (mm): 3.97
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
VA Solid Drill VSD Type
Sumitomo Electric Industries
2.50(2)
11.99 - 47.99 SGD
Dimension W (mm): 0.25xD, Point Angle (Degree): 118
Category Cutting Tools, Abrasives > Cutting Tools > Drill > For Iron Works > Straight Shank Drill
Heat Shrinkable Tubing, General Use, Black
Sumitomo Electric Industries
4.40(5)
8.99 - 19.99 SGD
Shrinking Temperature End (Degree C): 115, Length (m): 1, Color: Black, Material: Electron beam cross-linking soft flame-retardant polyolefin resin
Category Electrical Material, Control Device, Solder, Static Electricity > Electrical Materials > Cable ties, Free bush, Coil tube, and TubeHot (at normal temperature) shrinkage tube > Wire protection tube > Shrinkable Tubing
Turning Insert
Sumitomo Electric Industries
83.99 SGD
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > Diamond
Chip NF - CNMX
Sumitomo Electric Industries
89.99 SGD
ADD TO CART
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Negative Chip > Rhombus
Chip NF-SDKN
Sumitomo Electric Industries
92.99 SGD
ADD TO CART
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
Chip NF - SFCN
Sumitomo Electric Industries
92.99 SGD
ADD TO CART
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
Chip NF-TCMT
Sumitomo Electric Industries
74.99 SGD
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > triangle
Chip NF - VCMT
Sumitomo Electric Industries
88.99 SGD
ADD TO CART
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > Diamond
Chip NF-SCMT
Sumitomo Electric Industries
74.99 - 75.99 SGD
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
Chip NF - SEGN
Sumitomo Electric Industries
91.99 SGD
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
Chip NF-SFAN
Sumitomo Electric Industries
92.99 SGD
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
Chip NF - SPGN
Sumitomo Electric Industries
86.99 SGD
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > square
Chip NF-XEEW
Sumitomo Electric Industries
139.99 SGD
ADD TO CART
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > pentagon
Chip NF-TEGN
Sumitomo Electric Industries
74.99 SGD
Material: DA1000
Category Cutting Tools, Abrasives > Cutting Tools > Inserts > Cutting Edge Exchange Chip (Disposable Tip) > Positive Chip > triangle

1 2 3 4 5 6 7 8 9 10 ...15 Next

Sumitomo Electric Related Products

Related Products