Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

Safety Protection Equipment

Sort by:
Showing 31 - 60 of 2,910 Results
Show: 30 60 90
VIEW: Grid View List View
Mp Type Helmet
Otokomae MonotaRO
22.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: For flying-falling object protection, during crash, for electrical insulation (withstand voltage 7000V or less, test voltage 20000V in water 1 minute), For flying-falling object protection, during crash, for electrical insulation (withstand voltage 7000V or less, test voltage 20000V in water 1 minute), Impact Absorption Liner (Polystyrene Foam): Available, Outer Dimensions (Length L x Width W x Height H) (mm): 265x220x152, Standard: It conforms to public welfare Ministry of Labor protective hat standard, Weight (g): 410, Material: ABS resin
Category Safety Protection Equipment > Hard Hats > Hard Hats
DIC Helmet, Hard Hat
DIC
5.00(1)
35.99 - 37.99 SGD
Outer Dimensions (Length L x Width W x Height H) (mm): 255x208x134
Category Safety Protection Equipment > Hard Hats > Hard Hats
Ear Muffs
TRUSCO
53.99 SGD
ADD TO CART
NRR Value: 27dB, Standard: ANSI (American National Standards Institute) certified products, Weight (g): 310, Height (mm): 195 to 230, Width (mm): 133, Material: Ear cover: ABS resin, polyvinyl chloride (PVC) headband: Steel, TRUSCO Part Number: 364-6386, Specification: Covered steel headband (soft cushion), up and down adjustable cups
Category Safety Protection Equipment > Earplugs, Earmuffs > Ear Muffs
Ear Plugs, Super Fit
ThreeM 3M
1.99 SGD
ADD TO CART
Frequency (Hz)/Sound Isolation Value (dB)/Standard Deviation (dB): 125/35.0/5.1 250/36.0/3.9 500/37.3/3.9 1000/36.8/3.8 2000/40.9/4.5 4000/46.4/5.4 8000/47.7/2.8, NRR Value: 33, JIS Standard: CONFORMITY OF JIS T8161 EP1, Material: Urethane foam, Type: Earplug (form type), TRUSCO Part Number: 344-7201
Category Safety Protection Equipment > Earplugs, Earmuffs > Earplugs
Hard Hat, Helmet
TOYO SAFETY
26.99 - 80.99 SGD
Category Safety Protection Equipment > Hard Hats > Hard Hats
Goggle Clip
TOYO SAFETY
3.99 - 4.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Safety Protection Equipment > Hard Hats > Hard Hat Related Products > Goggles Clip
Full Harness Safety Belt, Lanyards
FUJII DENKO
4.17(6)
139.99 - 169.99 SGD
Category Safety Protection Equipment > Safety Belts > Harness Type
Shin Guards
KIRIMARU
3.00(2)
24.99 SGD
ADD TO CART
Purpose: It protects your shins from scatter during bush cutter working, Weight (g): 470, Color: Black, Dimension (mm): 400x240x90, Material: PP
Category Safety Protection Equipment > Belt, Belt Supporters > Protective Supplies
Ear Plugs, "Classic"
ThreeM 3M
0.99 SGD
ADD TO CART
Mass (g/piece): 0.15, NRR Value: 29, Code: Not available, JIS Standard: JIS T8161 EP-1 (CLASS 1) COMPLIANT, Type: No cord, Size: One Size Fits All, Material: Vinyl chloride, TRUSCO Part Number: 344-7189, Specification: JIS T8161 EP-1 (CLASS 1) COMPLIANT, w/ case
Category Safety Protection Equipment > Earplugs, Earmuffs > Earplugs
DIC Helmet Sya-X, With Liners
DIC
5.00(1)
46.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Withstands voltage well but not suitable for use in high temperature. Not for electromagnetic wave protection, Purpose: For protection from falling of flying objects and for protection from falling. Electric resistance, Head Circumference (cm): (Estimated) 55.5 - 61.0, Impact Absorption Liner (Polystyrene Foam): Available, Inside Dimension (Width x Depth D): 204x230mm, Outer Dimensions (Length L x Width W x Height H) (mm): 283x226x148, Weight (g): 410, Material: ABS resin
Category Safety Protection Equipment > Hard Hats > Hard Hats
Earmuff, Super-Thin And Light Type
ThreeM 3M
43.99 SGD
ADD TO CART
NRR Value: 21, Standard: US ANSI Z 3.19-1974, Type: Neck band type, Weight (g): 120
Category Safety Protection Equipment > Earplugs, Earmuffs > Ear Muffs
0.5mmx73m Stainless Steel Safety Wire
ESCO
1.00(1)
24.99 SGD
ADD TO CART
Diameter (phi mm): 0.5, Overall Length (mm): 73, Material: SUS304, ESCO Part Number: EA534XA-0.5
Category Safety Protection Equipment > Fall Preventing Codes > Connecting Wires
Kh Tough Hook Retractable Safety Belt Universal Caps Universal Type
KIYO (KH)
4.50(2)
119.99 SGD
ADD TO CART
Effective Hook Diameter (mm): 130, Material (lanyards): Nylon, Lanyards (Diameter)(mm): Flat rope, Lanyards (permissible length) (mm): 1500, Materials (hook): Alumi lever with flexible collar, Buckle: Slide type buckle, Hook Opening (mm): 60, Belt Color: Black, Belt Length (mm): 1200, Belt Width (mm): 50, Weight (g): 1130
Category Safety Protection Equipment > Safety Belts > Chain Slings 1 Leg (Winding Type)
Leather Fanny Pack
TRUSCO
93.99 SGD
ADD TO CART
Dimensions (Width W x Height H) (mm): 180x220, Compatible Belt Width (mm): 50, Weight (g): 350, Abstract: Kawakoshi-bukuro, Finishing Material: Cowhide (ticket skin), Dimension (mm): 180x220, TRUSCO Part Number: 143-2770
Category Safety Protection Equipment > Waist Pouch, Tool Bags, Carrying Cases > Waist Pouches
Safety Belt, "SWING RITRA"
FUJII DENKO
129.99 - 169.99 SGD
Trunk Belt (W x L)(mm): 50x1200, Lanyards (permissible length) (mm): 1500, Lanyards (strap width) (mm): 22, Specification: Lanyards / woven rope
Category Safety Protection Equipment > Safety Belts > Chain Slings 1 Leg (Winding Type)
Safety Belt, "SR RITRA"
FUJII DENKO
5.00(4)
87.99 - 88.99 SGD
Body Belt Length (mm): 1200, Trunk Belt Width (mm): 50, Lanyards (permissible length) (mm): 1100, Hook: FS-99
Category Safety Protection Equipment > Safety Belts > Chain Slings 1 Leg (Winding Type)
Safety Reflective Vest
BS
3.50(4)
22.99 SGD
Clothes Length (cm): 52, Waist (cm): Up to about 100 cm, Weight (g): About 135, Size: One Size Fits All
Category Safety Protection Equipment > Safety Vest And Tasuki > Safety Vest
Support Belt
DENSAN
4.67(3)
36.99 SGD
ADD TO CART
Materials (tape): Polypropylene, Belt Length (mm): 1000-1250 (adjustment is possible), Material: (Shoulder pad) : rubber Fulcrum (trapezoid portion): surface/cowhide rear side/vinyl chloride
Category Safety Protection Equipment > Belt, Belt Supporters > Supporter > Suspenders
SR Litora (aluminum buckle)
FUJII DENKO
99.99 SGD
Body Belt Length (mm): 1200, Trunk Belt Width (mm): 50, Lanyards (permissible length) (mm): 1100, Hook: FS-99
Category Safety Protection Equipment > Safety Belts > Chain Slings 1 Leg (Winding Type)
SR Litora (one touch buckle)
FUJII DENKO
5.00(1)
119.99 - 129.99 SGD
Body Belt Length (mm): 1200, Trunk Belt Width (mm): 50, Lanyards (permissible length) (mm): 1100, Hook: FS-99
Category Safety Protection Equipment > Safety Belts > Chain Slings 1 Leg (Winding Type)
Swing Litra (one touch buckle)
FUJII DENKO
169.99 - 189.99 SGD
Trunk Belt (W x L)(mm): 50x1200, Lanyards (permissible length) (mm): 1500, Lanyards (strap width) (mm): 22, Buckle: One-touch buckle, Specification: Lanyards / woven rope
Category Safety Protection Equipment > Safety Belts > Chain Slings 1 Leg (Winding Type)
Helmet Chin Strap
MIDORI ANZEN
3.50(2)
3.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Weight (g): 10, Material: Polypropylene (PP), TRUSCO Part Number: 388-6913, Compatible: SC series (helmet) Midorianzen product
Category Safety Protection Equipment > Hard Hats > Hard Hat Related Products > Chin Straps
Safety Belt Hook Hanger
Tajima Tool
4.99 SGD
ADD TO CART
Weight (g): 17, Material: Resin, Compatible: 50mm-wide belt
Category Safety Protection Equipment > Safety Belts > Safety Belt Related Products > Hooks
MP Type Helmet, Hard Hat
MonotaRO
18.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Impact absorbing liner equipped with this product, however it does not have crash protection capability., This product is manufactured in Japanese standards. Please check the specification before you order., Impact absorbing liner equipped with this product, however it does not have crash protection capability., Purpose: For falling and flying objects, for electrical insulation Car body assembly manufacturing process of automotive factories, assembly and tuning of machinery at narrow places, loading and unloading work (middle shelf of boxes, there are many instances o, For falling and flying objects, for electrical insulation Car body assembly manufacturing process of automotive...
Category Safety Protection Equipment > Hard Hats > Hard Hats
Driver Cutter L Belt Holster
Tajima Tool
4.25(4)
8.99 SGD
Weight (g): 72
Category Safety Protection Equipment > Waist Pouch, Tool Bags, Carrying Cases > Tool Pouches > Cutters, Knifes, Scissors
Tool Holder
SUGINO KOGYO
4.00(3)
8.99 - 15.99 SGD
Belt Width (mm): 69
Category Safety Protection Equipment > Waist Pouch, Tool Bags, Carrying Cases > Tool Pouches > For Hammers
Glow-In-The-Dark Sealing Tape
TOYO SAFETY
3.00(1)
8.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Standard Duration (h): 8, Sheet Dimensions (mm): Width 10 x length 110
Category Safety Protection Equipment > Hard Hats > Hard Hat Related Products > Stickers, Tapes
Helmet Shield With Ventilation Holes
MIDORI ANZEN
4.50(2)
40.99 - 43.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Weight (g): 380, Material: ABS, Specification: M-shaped one touch chin strap, slip-off prevention mechanism, intercommunicating pore.
Category Safety Protection Equipment > Hard Hats > Hard Hats
Torso Belt for Safety Casting Aluminum One-Touch Buckle
Tajima Tool
4.00(3)
60.99 - 70.99 SGD
Belt Width (mm): 50, Material: (Buckle) aluminum
Category Safety Protection Equipment > Belt, Belt Supporters > Belt
ID Card Holder
TANIZAWA SEISAKUSHO
5.00(1)
14.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Width x Length (mm): 71x106, Card Size(mm): 54 x 86 x 0.8mm (JIS X6301 (size)), Weight (g): 40, Color: White, Material: (Body) ABS resin + polycarbonate, (case) polyvinyl chloride (PVC), TRUSCO Part Number: 328-3879, Specification: Double-sided adhesive urethane sponge tape
Category Safety Protection Equipment > Hard Hats > Hard Hat Related Products > Accessory Holders

Prev 1 2 3 4 5 6 7 8 9 10 ...97 Next