Buy more than* S$200* and get FREE SHIPPING
Due to the maintenance, we will close our website from July 21,2018 10PM to July 22, 2018 4AM JST.
All customers cannot shop on our website during the time. Thank you.
Caution: Please use the following two hinge cover per sheet.Also in case of using one piece, such as providing a bearing on the other, be careful eccentric load is not applied to the hinge. (Furthermore the rotary center of the bearing and the like is setting in t, Purpose: Sound instruments, working tools, etc.
Caution: Do not retry caulking processing hinge and bracket later 2 pieces or less for 1 lid. Please attach the product with the shaft in a horizontal state. Please do not use in a place where continuous operation is performed ., Do not retry caulking processing hinge and bracket later 2 pieces or less for 1 lid. Please attach the product with the shaft in a horizontal state. Please do not use in a place where continuous operation is performed ., Purpose: Medical equipment OA equipment acoustic equipment, etc., Medical equipment OA equipment acoustic equipment, etc.
Caution: Please use the following two hinge cover per sheet.Also in case of using one piece, such as providing a bearing on the other, be careful eccentric load is not applied to the hinge. (Furthermore the rotary center of the bearing and the like is setting in t, Purpose: Prototype embedded survey before starting mass production, Specification: Effective torque range/125 deg
Caution: "※ Because of product characteristics, backlash occurs.
※ Mount the hinge L · R shafts so that they are on the same line.
※ Please use one set on the left and right for one lid.
※ Since the shaft and housing (B) can be inserted and removed, please be careful when installing.
※ Be sure to use a flat washer (nominal 3 small circle) between this product and the screw head. ", Purpose: Communication equipment, audio equipment and housing facilities and power distribution panel, etc., Weight (g): 42, Recommended Screw Tightening Torque (N m [kgf / cm]): 0.63(6.4), Operating Temperature Range (deg C): 0-+40
Caution: * Be careful not to get your fingers caught in the cover when attaching or operating the cover. Removing the cover is not possible after cover installation. When falling free falls in the torqueless direction, please provide a stopper. Because this product is one way, it rotates with a slight force. Therefore, in the delivered state, anti-rotation stopper is attached. Be sure to remove the anti-rotation stopper after temporarily fixing this product. It may not be installed., Purpose: Communications equipment , Acoustic equipment , Residential , distribution board etc., Weight (g): 110
Torque Value N m (kgf cm): Tilt direction/5.88+/-0.98(60+/-10) Swivel direction/2.45+/-0.49(25+/-5), Material and Processing: (Fixing bracket, rotating bracket and movable bracket (L) and (R)-bracket) SPCC/Uc (Shaft Tilt Swivel shaft stopper PIN) SUM/Uc (Disc) SUS304 /- (Germinated and retainer washers) SUS430 /- (Plug thrust thrust washers) POM black (Plate spring) S60C / 4 trioxide iron coating Hex nut S/Uc, Weight (g): 289, Caution: Please use with the stipulated torque value. Do not adjust some torque (like loosening the nut). Floor mounting specifications. In the case of hanging wall surface equipment, please contact us. Please use the movable brackets L and R as one, a, Application: Display, OA equipment, various display screens, etc.
Caution: *Please use less than 2 for one lid. *Please mount this product in a horizontal state. *Please do not use it where you do continuous motion. * Do not adjust the torque., Purpose: Medical equipment , Acoustic equipment , Others, Operating Temperature Range (deg C): -10-+50, Weight (g): 47.8
Caution: * Two and less should be used per one lid. * The product should be mounted in condition which the shaft is a horizontal. * Do not use for place to do continuous operation. * Using of expected the damper effect should be avoided., Purpose: Display, OA equipment, various display screens, etc., Initial Torque Value (Room Temperature) N/m (kgf/cm): 0.69(+/-0.15)[7(+/-1.5), Material and Processing: (Case) A603S / anodized aluminum (white) (shaft) SUSXM7 / degreasing (plug) POM / black (push nut) SUS (bracket) SUS430 / apparel polishing, Dimension G (phi mm): 3.2, Dimensions H (phi mm): 10, Dimension Q(mm): 13, Dimension K(mm): 8, Dimensions J (mm): 3, Dimensions N (mm): 10, Dimensions p (mm): 10, Dimensions C (mm): 11, Dimensions B (mm): 15, Dimensions E (mm): 3, Dimensions D (mm): 1...