Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

Cutting and Bending

Sort by:
Showing 1 - 30 of 63 Results
Show: 30 60 90
VIEW: Grid View List View
Super Hand
NITTO KOHKI
3.00(1)
589.99 SGD
ADD TO CART
Purpose: For deburring work, metal grinding, correction work, Maximum Mounting Shaft Diameter (phi mm): 5, No-load Stroke Length (mm): 9, No-oad Stroke Number (min-1): 6300, Working Pressure (MPa [kgf/cm2]): 0.6[6], Air Consumption (m3/min): 0.2, Weight (kg): 0.5, Overall Length (mm): 182 (main part), TRUSCO Part Number: 351-4579, Specification: Pneumatic small file for formatting, Accessories: SF-13 flat file : 1pc SF-13 round file : 1pc SF-11Triangular type file : 1pc SF-13 round intep file : 1pc Hex wrench 2.5mm : 1pc Sanding pad:1pc coupler HA-65SN:1pc
Category Cutting and Bending > Air Saw
Pneumatic Nipper
MUROMOTO TEKKO
5.00(3)
249.99 - 409.99 SGD
Caution: Blades are not included. Please purchase the blade according to the applications
Category Cutting and Bending > Air Nippers
Air Nibbler
ESCO
139.99 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Number of Strokes (min-1 [Time/minute]): 3500, Indispensability Compressor (kw): 1.5, Air Consumption (L/min): 280, Blade Width (mm): 4, Cutting Capability (mm): Steel: 1.4, aluminum: 1.0, Working Pressure (MPa): 0.62, Screw Pilot Hole Size (mm): phi21, Weight (kg): 1.1, Overall Length (mm): 170, ESCO Part Number: EA166A
Category Cutting and Bending > Air Nibbler
Air Saw
ESCO
199.99 - 339.99 SGD
Suction Port Size: 1/4inchPT, Air Consumption (L/min): 170
Category Cutting and Bending > Air Saw
Air Saw
KUKEN
609.99 SGD
ADD TO CART
Cutting Speed (mm/min): 1.0mm thick iron plate: about 1200 3.2mm thick iron plate: about 200, Compressor: 2.2(kW), Noise Level (dB(A)): 67, Hose Mouthpiece Mounting Screw: Rc1/4, Hose (mm): 6.5, Air Consumption (m3/min): 0.19, Speed: 11000 (fpm) (round trip), Weight (kg): 1.1 (lead hose), Overall Length (mm): 228 (without lead hose), Stroke (mm): L at the time: 10 S: 5, Accessories: Coupler 20PMx1, 6 square bar spanner 4mmx1
Category Cutting and Bending > Air Saw
Air Saw, Low-Speed Type
SP AIR
5.00(1)
399.99 SGD
ADD TO CART
Purpose: It is optimum to rectilinear such as automobile body panel of 2 adjusting and in addition iron & aluminum sheet rotary shearing job.With file in file of machining part metallurgy being attached china resin and the like., Hose Mounting Nozzle: NPT1/4, Unit Strokes (min-1 [time/min]): 5000, Air Consumption (L/min): 75, Cutting Capability (mm): 1.5 (iron plate), Weight (kg): 1.15, Overall Length (mm): 240, Description 2: So of course saver,is also available as a file., TRUSCO Part Number: 249-0471, Specification: Low-speed type, Accessories: 32 Blades (1pc), round file, flat file and triangular files (1pc. each)
Category Cutting and Bending > Air Saw
Air saw & file
SHINANO
399.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: Cutting of metal panels and resin, Stroke Length (mm): 10, Cutting Ability (mm) Iron Plate: 1.5, Working Pressure (MPa): 0.6, TRUSCO Part Number: 351-7799
Category Cutting and Bending > Air Saw
Air saw
SP AIR
349.99 SGD
ADD TO CART
Stroke Number(Times/min.): 11000, Cutting Capability (mm): 1.5, Weight (kg): 0.48, Overall Length (mm): 250
Category Cutting and Bending > Air Saw
Air Saw
MonotaRO
4.17(6)
149.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Do not use for any other purpose than original., Purpose: Cutting work of aluminum, plastic, wood., Air Outlet: PT1/4, Number of Strokes (min-1 [Time/minute]): 9000-10000, Air Consumption (m3/min): 0.05, Working Pressure (MPa): 0.62, Cutting Capability (mm): 1.6, Weight (g): 600, Overall Length (mm): 280, Stroke (mm): 10, Accessories: replacement blade 32 pitch (1 sheet) / 24 pitch (1 sheet)
Category Cutting and Bending > Air Saw
Air Nibbler
SHINANO
539.99 SGD
ADD TO CART
Category Cutting and Bending > Air Nibbler
Air Shear
SHINANO
489.99 SGD
ADD TO CART
Category Cutting and Bending > Air Nibbler
Easo 604
Compact Tool
559.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Cutting and Bending > Air Saw
Air Scissors
MASTER AIR
5.00(2)
259.99 SGD
ADD TO CART
No Load Rotation Speed (min-1[r.p.m]): 2000, Hole Diameter (phi mm): (Recommended air hose) 10, Weight (kg): 1.18, Overall Length (mm): 251
Category Cutting and Bending > Air Scissors
Nile Aero nipper main unit (for standard type , for machine installation) MR 30 AM
MUROMOTO TEKKO
359.99 SGD
ADD TO CART
Category Cutting and Bending > Air Nippers
Air file
SHINANO
469.99 SGD
ADD TO CART
Purpose: For grinding of molds and small parts., Stroke Length (mm): 5, Hose Mounting Nozzle: Rc1/4, Air Consumption (m3/min): 0.28, Working Pressure (MPa): 0.6, Chucking Ability (mm): 5, Weight (kg): 0.52, Overall Length (mm): 148, TRUSCO Part Number: 404-2751
Category Cutting and Bending > Air Saw
Nile angle type Eyanippa body (double-acting) MS20V
MUROMOTO TEKKO
499.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Cutting and Bending > Air Nippers
Nile New Hillaux AF 7
MUROMOTO TEKKO
609.99 SGD
ADD TO CART
Category Cutting and Bending > Air Saw
Nile New Hillaux AF 7S
MUROMOTO TEKKO
619.99 SGD
ADD TO CART
Category Cutting and Bending > Air Saw
Nile angle type Eyahasami body AM10
MUROMOTO TEKKO
439.99 SGD
ADD TO CART
Category Cutting and Bending > Air Scissors
Nile Eyanippa body (increase pressure type) MP15
MUROMOTO TEKKO
529.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Cutting and Bending > Air Nippers
Nile Eyanippa body (single-edged actuated) CP30
MUROMOTO TEKKO
619.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., ※ blade is sold separately., Welding Pressure (N): 2740, Air Consumption Capacity (cm3/Times): 438, Working Pressure (MPa): 0.5-0.6, Grip Diameter (phi mm): 56, Weight (g): 630, Overall Length (mm): 201
Category Cutting and Bending > Air Nippers
Air Saw
SHINANO
469.99 SGD
ADD TO CART
Purpose: Cutting of metal panels., 2014 TRUSCO Published Page: 2-1594, Exhaust Direction: Backward, Stroke Length (mm): 5, Stroke Number(Times/min.): 10500, Hose Mounting Nozzle: Rc1/4, Air Consumption (m3/min): 0.28, Working Pressure (MPa): 0.63, Cutting Capability (mm): 2, Weight (kg): 0.52, Overall Length (mm): 148, TRUSCO Part Number: 404-2743, Accessories: Spring elastomer grip with
Category Cutting and Bending > Air Saw
Air nipper (no round lever)
VESSEL
269.99 - 439.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Cutting and Bending > Air Nippers
Square air nipper
VESSEL
289.99 - 479.99 SGD
Category Cutting and Bending > Air Nippers
Slide air nipper pulling cut type
VESSEL
299.99 - 349.99 SGD
Category Cutting and Bending > Air Nippers
Hilsau
MUROMOTO TEKKO
539.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Number of Reciprocating Times (Time/min): 3500, Grasping Diameter (mm): 29x29, Air Consumption (m3/min): 0.2, Body Dimension (mm) Overall Length: 158, Working Pressure (MPa): 0.55-0.65, Weight (g): 380, Stroke (mm): 5, TRUSCO Part Number: 221-3036
Category Cutting and Bending > Air Saw
Air nipper
VESSEL
259.99 - 809.99 SGD
Category Cutting and Bending > Air Nippers
Air Nibbler
TPT
4.00(1)
119.99 SGD
ADD TO CART
Purpose: Car body work, sheet metal work. To cut iron plate up to 1.2mm thick., Operating Air Pressure (MPa[kgf/cm2]): 0.6[6.3], Air Intake: PT1 / 4 coupler with, Number of Strokes (min-1 [Time/minute]): 5000, Air Hose Inside Diameter (phi mm): 6.5 or more, Air Consumption (L/min): 110, No Load Rotation Speed (min-1[r.p.m]): 22000, Cutting Capacity: Iron plate maximum thickness 1.2mm, Weight (g): 675, Overall Length (mm): 155
Category Cutting and Bending > Air Nibbler
AS type air cloth (body only)
MUROMOTO TEKKO
579.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Air Consumption Capacity (cm3/Times): 223, Working Pressure (MPa): 0.5-0.6, Grip Diameter (phi mm): 36, Weight (g): 300, Overall Length (mm): 211, TRUSCO Part Number: 104-0634
Category Cutting and Bending > Air Scissors
Hilsau
MUROMOTO TEKKO
569.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Number of Reciprocating Times (Time/min): 5500, Grasping Diameter (mm): 39x37, Air Consumption (m3/min): 0.28, Body Dimension (mm) Overall Length: 210, Working Pressure (MPa): -0.65, Weight (g): 900, Stroke (mm): 10, TRUSCO Part Number: 176-1773
Category Cutting and Bending > Air Saw

1 2 3 Next