Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

Air Riveter

Sort by:
Showing 1 - 21 of 21 Results
Show: 30 60 90
VIEW: Grid View List View
Air Riveter
LOBTEX
4.00(3)
799.99 SGD
ADD TO CART
Caution: Make sure to use it attaching to tank unit. Wear protective glasses while use. Read instruction manual and understand it well before use.Use air pressure range should be 0.49-0.59MPa(5-6kgf/cm2). Over air pressure cause accident and injury. To refuel hydraulic oil, remove flame head., 2014 TRUSCO Published Page: 1-2235, Operating Noise (dB): (Value basis by the manufacturer) 69.5, Air Pressure (MPa[kgf/cm2]): 0.49 to 0.59[5 to 6], Tensile Strength (kN [kgf]): (Vacuum) ON / 9.0 [918], OFF / 10.0 [1020], Compatible Rivet (phi mm): 2.4, 3.2, 4.0, 4.8, Air Consumption (L/min): 68 (when air pressure 0.49MPa), Weight (g): 1090, Stroke (mm): 19, TRUSCO Part Number: 406-7452, Specification: Air control/air-valve type, shock-less function, air filler port/right and left(changeable, vertica...
Category Air Riveter
Air Riveter
JTC
549.99 SGD
ADD TO CART
Air Pressure: 6 to 8, Rivet Diameter: Range of Use(phi mm): 2.4,3.2,4.0,4.8,6.0,6.4, Height (mm): 240, Weight (kg): 1.85, Width (mm): (Not including cap) 165, Specification: With zipper Attractive force : 1600kg/f, Accessories: Nose piece, Joe case, Joe, Joe pusher, hex wrench, bolt plug, spanner, coupler plug
Category Air Riveter
Air Riveter AR2000 Series
LOBTEX
809.99 - 1,279.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Required Air Pressure (MPa[kgf/cm2]): 0.49-0.59(5-6)
Category Air Riveter
Air Riveter
LOBTEX
929.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Air Consumption per Unit (L/rivet): 1.7, Required Air Pressure (MPa[kgf/cm2]): 0.49-0.59(5-6), Height x Length x Width (mm): 283x270x21, Tool Stroke (mm): 16, Rivet Diameter Working Range (phi6.4 mm): x, Weight (kg): 1.2, Overall Length (mm): 270, TRUSCO Part Number: 161-1399
Category Air Riveter
Air Riveter Angle Type
LOBTEX
1,309.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Air Riveter
Air Riveter
MonotaRO
229.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Retraction Force (kgf): 1385, Air Outlet: PT1/4, Rivet Diameter: Range of Use(phi mm): 2.4,3.2,4.0,4.8,5.6,6.4, Working Pressure (MPa): 0.62, Height (mm): 300
Category Air Riveter
Shrimp mark hydraulic oil
LOBTEX
24.99 SGD
ADD TO CART
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., Compatible: N1A2
Category Air Riveter
Refueling aircraft
LOBTEX
45.99 SGD
ADD TO CART
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., Compatible: N1A2
Category Air Riveter
Nose piece for rivetter M 4.0 B10029
LOBTEX
8.99 SGD
ADD TO CART
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., * Please install the size that matches the rivet flange diameter used. If rivets of different sizes are used, riveting can not be performed normally., * Please install the size that matches the rivet flange diameter used. If rivets of different sizes are used, riveting can not be performed normally., Purpose: Lobutex S type , M type air riveter, tip part for hand riveter, Lobutex S type , M type air riveter, tip part for hand riveter, Diameter of rivet (phi mm): 4, Compatible Body: R1A1,AR2000SV,AR2000MVAR2000S,AR2000M,AR011M,AR011S,AR011P,ARV011M,AR022M,ARV022M,ARV025M,ARV015S,ARV015M,R1B1,@R03i,HR002A,HR002D,HR005A,HR003A,HR300, TRUSCO Part Number: 786-4914
Category Air Riveter
Riveter nose piece 4.8 (S volt) B 43751
LOBTEX
65.99 SGD
ADD TO CART
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., * It becomes nose piece only for S bolt (4.8). * Applicable only to compatible models., * It becomes nose piece only for S bolt (4.8). * Applicable only to compatible models., Purpose: Lobtex air end riveter (hand riveter) tip parts (compatible models only), Lobtex air end riveter (hand riveter) tip parts (compatible models only), Compatible Body: AR3000EV,R1A2,HR2050H, TRUSCO Part Number: 786-4931
Category Air Riveter
Rivetters nose piece large
LOBTEX
19.99 SGD
Purpose: Lobtex air end riveter (hand riveter) tip parts (compatible models only), Compatible Body: AR011H,AR021H
Category Air Riveter
Nose piece for shrimp rivetter M 2.4
LOBTEX
9.99 SGD
ADD TO CART
Caution: * Please install it according to the rivet flange diameter used. * If rivets of different sizes are used, riveting can not be performed normally., *This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: Lobutex S type, M type air riveter, tip part for hand riveter, Compatible Rivet (phi mm): 2.4, Weight (g): 5, Compatible Body: AR2000S,AR2000M,AR2000SV,AR2000MV,AR011MX,ARV025M,R1A1,R1B1,R03I,HR002A,HR002D,HR005A,HR003A,HR300, TRUSCO Part Number: 786-4892
Category Air Riveter
Air riveter set
MonotaRO
4.25(8)
259.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Retraction Force (kgf): 840, Air Consumption (L/bottle): 1.1, Air Outlet: PT1/4, Rivet Diameter: Range of Use(phi mm): 2.4/3.2/4.0/4.8, Working Pressure (MPa): 0.62, Body Weight (kg): 1.46
Category Air Riveter
Air Riveter
LOBTEX
1,199.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Required Air Pressure (MPa[kgf/cm2]): 0.49-0.59(5-6), Rivet Diameter Working Range (phi6.4 mm): x, Air Consumption (L/min): 90, Height (mm): 283, Weight (kg): 1.35, Overall Length (mm): 302, TRUSCO Part Number: 164-2669
Category Air Riveter
Safety cap for GP 101 (101022)
JTC
27.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Air Riveter
Riveter
SHINANO
729.99 - 939.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Working Pressure (MPa): 48-68
Category Air Riveter
POP Air Riveter
NIPPON POP RIVETS AND FASTENERS
5.00(1)
-
2014 TRUSCO Published Page: 1-2236, Required Air Pressure: 0.5 to 0.6MPa
Category Air Riveter
Air Riveter
LOBTEX
-
Air Consumption per Unit (L/rivet): 1.5, Required Air Pressure (MPa[kgf/cm2]): 0.49 - 0.59(5 - 6), Height x Length x Width (mm): 225x271x80, Tool Stroke (mm): 14, Use Jaw: Medium, Rivet Diameter Working Range (phi6.4 mm): x, Rivet Diameter Working Range (phi4.0 mm): , Rivet Diameter Working Range (phi4.8 mm): (Not allowed NSS, for NST), Rivet Diameter Working Range (phi3.2 mm): , Rivet Diameter Working Range (2.4phi mm): , Type: Standard type, Weight (kg): 1.5, Overall Length (mm): 225
Category Air Riveter
Air Riveter Kit
GREAT TOOL
5.00(2)
-
Maximum Caulking Force (kg): 720, Air Consumption (L/bottle): About 1.5/1, Operating Air Pressure (MPa[kgf/cm2]): 0.44 to 0.68 [4.5-7], Air Outlet: 6.35mm (1/4inch)PT(Rc) female/PT(R)male, Rivet Diameter: Range of Use(phi mm): 2.4,3.2,4.0,4.8, Hose Diameter (phi mm): Inner diameter 6.5 (more than 1/4 inch) , Rivet Type: Aluminum body / steel shaft, Weight (kg): 1.6, Stroke (mm): 14, Set Contents: Air riveter body x 1 Exclusive spanner x 2 Nose piece (2.4/3.2/4.0/4.8mm) each x 2 Difference between oil x 1 One-touch plug x 1 Sealing tape x 1 Replacement jaw x 1 pair Replacement jaw case x 1 Replacement jaw pusher x 1 Repla, Caution: Do not use not applicable compressure. Follow usage. Otherwise you may cause false., Application: Caulking by rivets. For DIY.
Category Air Riveter
Shrimp air riveter M for the nose piece 3.2
LOBTEX
5.00(1)
-
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Compatible Flange: 3.2mm
Category Air Riveter
Shrimp air riveter M for the nose piece 4.8
LOBTEX
4.00(1)
-
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Compatible Flange: 4.8mm
Category Air Riveter

1

Air riveter Related Products

Related Products