Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

Reducer

Sort by:
Showing 1 - 30 of 34 Results
Show: 30 60 90
VIEW: Grid View List View
Pressure Reducing Valve for Water Supply
YOSHITAKE
72.99 SGD
ADD TO CART
Material (strainer): Stainless steel (net), synthetic resin (frame), Mesh (Strainer): 60 meshes, Primary Pressure (MPa): 100 - 750, Materials (valve body): Bronze, Compatible Fluid: Hot and cold water, Set Pressure Range (kPa): (Standard) 80+/-6, Mounting Direction: Combined horizontal and vertical, Nominal Diameter (A): 20, Connection: JIS Rc3/4, Maximum Temperature (degreeC): 60, Nominal Diameter (B): 3/4, Form: Pressure reducing valve for water supply, Weight (kg): 0.906, Material: ( Diaphragm-valve body and a check valve) Heat-resistant water resistant synthetic rubber, TRUSCO Part Number: 382-3041, Specification: (Open flow) 30L/min minimum (Closing pressure of reverse prevention mechanism) 3kPa maximum (Working pressure of negative pressure actuating mechanism) opening operation /-5...
Category Reducer
Pressure Reducing Valve, Cold and Hot Water, GD-24GS series
YOSHITAKE
5.00(1)
529.99 - 1,749.99 SGD
Minimum Differential Pressure (MPa): 0.05, Materials (valve body): Bronze, Material (diaphragm): NBR, Material (valve seat): Stainless steel, Materials (Valve): Urethane rubber, Compatible Fluid: Hot and cold water, Secondary Side Pressure Guage (MPa): 0.05 to 0.55, Valve-Inlet Pressure (MPa): 02. to 1.6, Connection: JIS Rc, Specification: Internal detection, valve leak 0
Category Reducer
Pressure Reducing Valve
VENN
5.00(1)
399.99 - 419.99 SGD
Material (bellows): SUS (stainless steel), Materials (Valve / Valve seat): SUS (stainless steel), Before/After Minimum Differential Pressure of Valve:(MPa): 0.02, Compatible Fluid: Steam, Material (gasket): PTFE, Dimension G(mm): 55, Material (Body): CAC406 (bronze casting), Specification: Small size, CAC made, wide use
Category Reducer
Pressure Reducing Valve
VENN
4.00(5)
129.99 SGD
Caution: Please attach a strainer to the primary side of the pressure reduction valve., Purpose: Strainer (60 meshes) built-in, with joint for pressure gauges (secondary side) Installation: both horizontal and perpendicular possible Material: (Main unit) CAC406 (bronze cast) (diaphragm disc) chlorinated water resistant rubber Fluid temperat, Material (disk): Chlorinated water resistant rubber, Material (diaphragm): Chlorinated water resistant rubber, End Connection: JIS Rc screw thread, Before/After Minimum Differential Pressure of Valve:(MPa): 0.02, Secondary Side Adjustable Pressure Range (MPa): 0.20 - 0.30, Compatible Fluid: Tap water and warm water, Set Pressure (MPa): 0.25, Material (Body): CAC406 (bronze casting), Weight (kg): 1.0, Others: Please attach a strainer to the primary si...
Category Reducer
Pressure Reducing valve GD-30 Series
YOSHITAKE
3.00(1)
399.99 - 439.99 SGD
Minimum Differential Pressure (MPa): 0.05, Material (bellows): Phosphor bronze, Materials (Valve / Valve seat): Stainless steel, Compatible Fluid: Steam, Valve-Inlet Pressure (MPa): 1.7 or less, Dimensions H1 (mm): 47, Connection: JIS Rc, Maximum Temperature (degreeC): 210, Dimension H (mm): 191, Material (Body): Bronze, Specification: Internal detection, with handle, built-in strainer
Category Reducer
Pressure Reducing Valve
VENN
129.99 SGD
Material (disk): Chlorinated water resistant rubber, Material (diaphragm): Chlorinated water resistant rubber, End Connection: JIS Rc screw thread, Before/After Minimum Differential Pressure of Valve:(MPa): 0.02, Secondary Side Adjustable Pressure Range (MPa): 0.05 - 0.12, Primary Compatible Pressure (MPa): less than 1.0 , Compatible Fluid: Tap water and warm water, Fluid Temperature (Degree C): 5 to 90 (In case of tube end core use, 5 to 40), Set Pressure (MPa): 0.08, Material (Body): CAC406 (bronze casting), Attachment: Horizontality, verticality freely, Weight (kg): 1.0, Others: Please attach a strainer to the primary side of reducing pressure control valve., Specification: Strainer (60 meshes) built-in, pressure gauge fittings (secondary side), Accessories: Heat insulation case (self-...
Category Reducer
Pressure Reducing Valve
VENN
5.00(1)
539.99 - 929.99 SGD
Material (diaphragm): SUS (stainless steel), Material (piston cylinder): CAC (bronze casting), Materials (Valve / Valve seat): SUS (stainless steel), End Connection: JIS 10K FF flange, Before/After Minimum Differential Pressure of Valve:(MPa): 0.05, Compatible Fluid: Steam, Material (Body): FC (gray cast iron), Specification: High durability and precision control
Category Reducer
Pressure Reducing Valve
VENN
129.99 SGD
Material (disk): Chlorinated water resistant rubber, Material (diaphragm): Chlorinated water resistant rubber, End Connection: JIS Rc screw thread, Before/After Minimum Differential Pressure of Valve:(MPa): 0.02, Secondary Side Adjustable Pressure Range (MPa): 0.11 - 0.23, Primary Compatible Pressure (MPa): less than 1.0 , Compatible Fluid: Tap water and warm water, Fluid Temperature (Degree C): 5 to 90 (In case of tube end core use, 5 to 40), Set Pressure (MPa): 0.20, Material (Body): CAC406 (bronze casting), Attachment: Horizontality, verticality freely, Weight (kg): 1.0, Others: Please attach a strainer to the primary side of reducing pressure control valve., Specification: Strainer (60 meshes) built-in, pressure gauge fittings (secondary side), Accessories: Heat insulation case (self-...
Category Reducer
Water pressure reducing valve (cold weather model)
YOSHITAKE
119.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Primary Pressure (MPa): 100-750, Nominal Diameter (A): 20, Connection Method: JIS Rc3/4, Maximum Temperature (degreeC): 60, Nominal Diameter (B): 3/4, Dimensions L (mm): 115, Weight (kg): 0.916
Category Reducer
RD31N-FL calm new standards fit a pressure reducing valve [Screw · 0.05-0.35MPa]
VENN
519.99 - 919.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Before/After Minimum Differential Pressure of Valve:(MPa): 0.05, Secondary Side Adjustable Pressure Range (MPa): 0.05-0.35
Category Reducer
Mini pressure reducing valve (for water shutoff valve)
SAN-EI Faucet Mfg
77.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Reducer
Pressure reducing valve (for hot and cold water) GD-200 series
YOSHITAKE
759.99 - 1,049.99 SGD
Maximum Pressure Reducing Ratio: 10:1, 10:1, 10:1, Compatible Fluid: Hot and cold water / air / other non-hazardous fluids, Valve-Inlet Pressure (MPa): 1, Connection: JIS 10KFF flange, Maximum Temperature (degreeC): 80, 80, 80, Form: Direct acting, Material: Polyurethane, Specification: 液体/気体,1.0MPa
Category Reducer
Pressure reducing valve (for hot and cold water) GD-26-NE series
YOSHITAKE
539.99 - 1,029.99 SGD
Connection: JIS Rc, Maximum Temperature (degreeC): 90
Category Reducer
Pressure reducing valve (for hot and cold water) GD-6 series
YOSHITAKE
569.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Secondary Side Pressure (MPa): 0.1-0.4, Maximum Pressure Reducing Ratio: 10:1, Nominal Diameter (A): 25, Connection: JIS Rc, Maximum Temperature (degreeC): 80, Nominal Diameter (B): 1, Dimension H (mm): 267, Dimensions L (mm): 185, Weight (kg): 8.2
Category Reducer
RD25SN-F New standard compliant water pressure reducing valve 【For boiler · electric water heater】
VENN
79.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Secondary Side Pressure (MPa): 80000, Face-to-face Dimensions (mm): 90, Fluid Temperature (Degree C): 5-55, Nominal Diameter: 20A
Category Reducer
RD31N-FH calm new standards fit a pressure reducing valve [Screw · 0.3-0.7MPa]
VENN
519.99 - 589.99 SGD
Before/After Minimum Differential Pressure of Valve:(MPa): 0.05, Secondary Side Adjustable Pressure Range (MPa): 0.3-0.7, Dimension G(mm): 41, Dimensions A (mm): 100
Category Reducer
RD43N-FML2 Benkei new standard conformity house-to-house water supply pressure-reducing valve
VENN
129.99 SGD
Secondary Side Pressure (MPa): 0.20, Before/After Minimum Differential Pressure of Valve:(MPa): 0.02, Secondary Side Adjustable Pressure Range (MPa): 0.11-0.23, Fluid Temperature (Degree C): 5-90
Category Reducer
Uniaxial type pressure reducing valve figs
Nihon Itomic
66.99 - 149.99 SGD
Maximum Working Pressure (MPa): 0.75
Category Reducer
Pressure reducing valve unit
KVK
119.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Reducer
Pressure reducing valve (for steam) GP - 1000 series
YOSHITAKE
629.99 - 2,579.99 SGD
Minimum Differential Pressure (MPa): 0.05, Valve-Inlet Pressure (MPa): 0.1-1.0, Maximum Temperature (degreeC): 220
Category Reducer
Water pressure reducing valve
YOSHITAKE
539.99 - 1,029.99 SGD
Category Reducer
Pressure Reducing Valve
YOSHITAKE
4.00(1)
129.99 SGD
ADD TO CART
Purpose: Pressure reducing valve for each part of a door to door water supply of condominium., 2015 Trusco Published Pages: 3 1223, 2014 TRUSCO Published Page: 2-2050, Secondary Side Pressure (MPa): 0.05 over 0.25 (standard setting /0.2), Compatible Fluid: Tap water, Valve-Inlet Pressure (MPa): 0.1-1.0, Nominal Diameter (A): 20, Connection Method: JIS Rc, Allowable Temperature (degreeC): 5-60, Nominal Diameter (B): 3/4, Height (mm): 146, Weight (kg): 0.87, Overall Length (mm): 90, Material: Valve box / bronze (NPb processing), the valve body / NBR, diaphragm / NBR (containing cloth), TRUSCO Part Number: 382-2885
Category Reducer
Water pressure reducing valve for Missouri
YOSHITAKE
5.00(1)
529.99 - 1,699.99 SGD
Category Reducer
Pressure Reducing Valve
Danle
5.00(1)
73.99 SGD
ADD TO CART
Caution: * Useful life may vary by region and water quality., Service Life (years): 8 (not the manufacturer's warranty period), Secondary Side Pressure (MPa): 0.25, Valve-Inlet Pressure (MPa): 1, Fluid Temperature (Degree C): 60 or less, Nominal Diameter (A): 20(Rc3/4), Strainer: 60 mesh (250microm), Flow Rate of Opening (L/min): 50 or more (during the primary side 300kpa), Fluid: Tap water, Material: [Box] valve CAC406 [stem] corrosion-resistant copper alloy [main section / valve seat] SUS [disk / diaphragm] FKM, Specification: (Stop water faucet) primary side included
Category Reducer
Dedicated water supply pressure reducing valve (cassette)
Danle
5.00(1)
54.99 SGD
ADD TO CART
Caution: *The body is sold separately.
Category Reducer
Water pressure reducing valve for
YOSHITAKE
5.00(1)
96.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Reducer
Pressure reducing valve
VENN
5.00(1)
179.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Face-to-face Dimensions (mm): 112, Before/After Minimum Differential Pressure of Valve:(MPa): 0.02, Nominal Diameter: 20, Weight (kg): 1.0
Category Reducer
Pressure-reducing valve for household supply water (with stopcock) (for water and hot water)
VENN
209.99 - 219.99 SGD
Before/After Minimum Differential Pressure of Valve:(MPa): 0.02, Nominal Diameter (A): 20, Weight (kg): 1.2
Category Reducer
0.1-0.5MPa hand pressure reducing valve (with coupler)
ESCO
93.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Reducer
0.3-0.9MPa hand pressure reducing valve (with coupler)
ESCO
93.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Reducer

1 2 Next