Oils, Chemicals, Repairs

Specification: 3-layer, Normal Opreration Pressure: 3.4, Burst Pressure (MPa): 17.2

Compatible: (Gauge manifold) 550-A, 500-AL, 500-HA, Color: Blue, Mounting Screw: NTP 1/8, Display Pressure Range (MPa): -0.1 - 1.7, Refrigerant: R134a, Gauge Diameter (phi mm): 68, Purpose: Pressure measurement

Compatible Gas: 134a

Specification: Pilot ball sight glass to see refrigerant state., Type: 2-Valve, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 175x70x225, Compatible Gas: HFC-134a

Discharge Capacity: 1 stroke 60cc

Dimension (mm): 70x55x150, Connection Diameter: JISB type cap phi40, Weight (g): 290, Valve Type: Ball valve (full bore), Compatible Outside Diameter (phi mm): 40 exclusive use, Valve Diameter (phi mm): 15 (1/2), Port Size (phimm): JIS type cap 40, Purpose: Oil, water, detergent, alcohol, and others, Caution: So if you install the oil filler plug "cokkun" the can will be hermetically sealed that's why you must open the air vent on the can surface. Not use solvents such as thinner, trichloroethylene. Not use with volatile type oils such as gasoline and

Compatible: (Gauge manifold) 550-A, 500-AL, 500-HA , Color: Red, Mounting Screw: NTP 1/8, Display Pressure Range (MPa): -0.1 to 1.7, Refrigerant: R134a, Gauge Diameter (phi mm): 68, Purpose: Pressure measurement

Compatible: R134a, Connection Diameter: M10, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Compatible: Car only R134a, Normal Opreration Pressure: 3.5, Burst Pressure (MPa): 17.5, Purpose: Charging hose.

Discharge Caliber (phi mm): 41, Purpose: For work to divide liquid into smaller.

Compatible: M10xP1.5 hose , ESCO Part Number: EA104PA-13, Usage: One side of hose connection mouth includes valve core pusher. Screw in service port which contains valve core. The other side must be screwed in service port without valve core., Dimension / Size (mm): About 7.0 height About 9.1x outer diameter inner diameter About 5.0x , Refrigerant: R134a

ESCO Part Number: EA111C, Capacity (g): 15, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Material: Aluminum, Width (mm): 105, Thickness (mm): 52, Overall Length (mm): 380, Weight (g): 420

Description: It is most suitable for the oil change of trucks and buses in large capacity, Application: In trucks and buses, Material: Polyethylene, Weight (ｋg): 1.8, Capacity (L): 24, Dimensions (Height x Width x Depth)(mm): 200x550x810

Connection Diameter: Straight 7 / 16UNF-20 (1 / 4F) x 45 degree M10 flare (with press ignored), Purpose: For R134a

TRUSCO Part Number: 111-4514, Material: Steel chromium plating (body) nylon (packing) vinyl chloride (discharge hose), Weight (ｋg): 1.0, Maximum Discharge Amount: 200cc / stroke, Viscosity: 10000cp below (ISO68) up to about), Hose Dimension (mm): 12x350, 2014 TRUSCO Published Page: 2-2249, 2015 Trusco Published Pages: 3 1439, Caution: * Not for gas, etc., * Not for gas, etc.

Compatible Models: MWC-40BS, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Dimensions (Height H x Width W x Depth D) (mm): 225x175x70, Low Pressure Compound Gauge (MPa): 1.2, Compound High Pressure Gauge (MPa): 3.5, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Set Contents: Hose (50cm), a low-pressure quick coupler, check valve, air purge valve, Compatible Gas: 134a, Purpose: To refill cooler compressor oil gas.

Compatible Gas: 134a, Caution: * Please use the attached fitting for R - 12 only when it is used exclusively for R - 12.

Storage Temperature (DegreeC): 0-50, Tube Overall Length (m): 0.3, Body Dimensions (Width x Depth x Height) (mm): 58x37x190, Warm-up Period: 2sec, Operating Temperature (degree C): 0-38, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Type: 3-Valve, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 175x70x225, Compatible Gas: HFC-134a

Connection Diameter: M10x1.5, Hose Length (m): 1.6, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Specification: Automatic retractable (no abnormal pressure safety valve), Type: 3-Valve, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 175x70x225, Purpose: R12 car only

Connection Shape: L-shaped insect with / S Straight, Purpose: For R-12

Material: PP (polypropylene), Weight (ｋg): 1.68, Capacity (L): 20, Dimensions (Diameter phi x Height H) (mm): 600x155, Heat-Resistant Temperature (deg C): 93

Material: PP, Dimension (mm): 45x45x100, Color: Yellow, Weight (g): About 10, Caliber (phi mm): About 22

Set Contents: Double-sided tape with holes perforated seal, plastic pedestal, light gathering for film, compressed syringe, push pin, repair liquid (0.534 mL) 1 bottle for each