Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

Original Hardwares

Sort by:
Showing 1 - 30 of 382 Results
Show: 30 60 90
VIEW: Grid View List View
Hardware Screw
TANAKA
4.67(3)
3.99 - 32.99 SGD
Category Original Hardwares > Hardware Screw
Corner Bracket Plywood Type
BX Kaneshin
1.99 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 3.7kN, N Value: 0.69, Laws and Regulations: Daira 12 public notice notification No. 1460, no.2 (RO), Surface Processing: Dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Standard: (GOODS) 2435 NO. 09 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 0881 NO., Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: PILLAR SIDE ONLY SCREW (CPQ-45) (GREY) X 2 TUBES AND FOUNDATION (BEAM) SIDE ONLY SCREW (CPQ-75) (BLUE) X 2
Category Original Hardwares > Joint Hardware
Plate Bracket
BX Kaneshin
2.99 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 8.4kN, N Value: 1.5, Laws and Regulations: Daira 12 public notice No. 1460 advice no. 2 (to), Plate Thickness (mm): 0.6, Standard: (GOODS) 2435 NO. 06 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 2252 NO., Material: NSS431DP-2 (high intensity diplophase stainless steel), Accessories: (No. 45) Rectangular-head screw CPQ-8(Gray) x 6 pcs.
Category Original Hardwares > Joint Hardware
Corner Bracket
BX Kaneshin
0.99 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 4.2kN, N Value: 0.79, Laws and Regulations: Daira 12 public notice notification No. 1460, no.2 (RO), Surface Processing: Dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Standard: (GOODS) 2435 NO. 09 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 0880 NO., Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: (No. 45) Rectangular-head screw CPQ-4(Gray) x 6 pcs.
Category Original Hardwares > Joint Hardware
Corner Bracket
BX Kaneshin
4.50(4)
0.99 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, HOUSEPLUS Resident Warranty: HP11-KT010/HP11-KT012, Notice No.1460 No.2: IsIs, N Value: (Center pillar)1.1, (corner pillar)1.0, Short Allowable Tensile Strength (kN): (Center pillar)6.3, (corner pillar)5.8, Plate Thickness (mm): 1.6, Surface Processing: Hot-dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Dimension (mm): 60x40, Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: (No. 45) Rectangular-head screw CPQ-6(Gray) x 6 pcs.
Category Original Hardwares > Joint Hardware
Metal Corner Bracket
TANAKA
5.99 SGD
ADD TO CART
Caution: For tightening dedicated angle bit screw TBA-65D and TBA-30 , please use the (optional) third square bit., Purpose: Used to connect pillar and horizontal beam, Proof Strength Test: Short-period standard tensile strength/8.3kN, Laws and Regulations: Second issue Notification No. 1460 (to), Surface Processing: Hot-dip galvanized steel sheet (Z 27) , Standard: No. No. 01A3046 goods and Testing Center for Construction Materials Performance Test , Dimension (mm): 25x120x120, Thickness (mm): 3.2, Material: JIS G 3302 SGCC or SGHC (steel strip and hot-dip galvanized steel sheet), Accessories: Dedicated angle Bittobisu (TBA-65D) x4 lines, (TB-101) x4 this
Category Original Hardwares > Joint Hardware
Right Angle Bracket
BX Kaneshin
5.00(1)
1.99 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Tensile yield strength (middle pillar / corner posts) Short-term standard junction (Pot) 6.0kN / 5.9kN, junction magnification (N value) 1.1 / 1.1, Surface Processing: -6% Molten zinc aluminum -3%, magnesium alloy plated steel sheet , Standard: HP11-KT011 / HP11-KT013 (stock) performance test house plus confirmatory test, Dimension (mm): 60x40x1.6, Material: (MSM-CC-DZC90 or MSM-HC-DZC90) ZAM ※, Accessories: Pillar side dedicated screw CPQ-45 (gray) x3 lines, foundation dedicated side screw CPQ-75 (Blue) x3 this
Category Original Hardwares > Joint Hardware
Hardware Screw
KANAI
5.00(1)
3.99 - 24.99 SGD
Category Original Hardwares > Hardware Screw
Construction Bracket Main Plate
KANAI
4.00(2)
0.99 SGD
ADD TO CART
Testing Center for Construction Materials: No. No. 10A2964, Notice No.1460 No.2: The, N Value: 1.0 or less, Short Allowable Tensile Strength (kN): 5.2, Plate Thickness (mm): 0.6, Surface Processing: Zinc alloy, Dimension (mm): 100x45, Material: SuperDyma NSDC570, Accessories: Bis YA-S45 (Silver) x6 Movies
Category Original Hardwares > Joint Hardware
Joint Bracket, "New Kuru-Pita"
Aim
3.00(1)
14.99 SGD
ADD TO CART
Set Contents: Joint metal fittings (material welded to 2 steel pipes of phi 22 mm outer diameter and 2.8mm-thick) x 1 piece, bolt (M16) x 2 (with 1 taper and 1 long screw)
Category Original Hardwares
Joint Tool, Hole Down Corner 10kN
TANAKA
5.00(1)
6.99 SGD
ADD TO CART
Short Standard Joint Strength (kN): (Corner of mast-)12.4, Performance Certified: S10A02-06, HOUSEPLUS Resident Warranty: HP08-KT031, Notice No.1460 No.2: To, N Value: 2.5 or less, Short Allowable Tensile Strength (kN): (In the mast-)13.5, Surface Processing: Alloy coated steel sheets, Thickness (mm): 2.3, Material: NSDHC/ZYXK18, Accessories: Special (NO. 3) ANGLE OF bit screw (TBA-65D) x 6 BOOK, Application: Used to connect pillar and horizontal beam
Category Original Hardwares > Brace Joint Hardware
Flat Plate SD
TANAKA
5.00(2)
1.99 SGD
ADD TO CART
Performance Certified: S10A04-02, Notice No.1460 No.2: Is, N Value: Under 1.1, Short Allowable Tensile Strength (kN): 5.9, Surface Processing: Alloy coated steel sheets, Thickness (mm): 0.6, Material: NSDC570/ZYXK18, Accessories: Exclusive (No. 3) bit angle screws (TB-45)x6 pcs, Application: Used to connect pillar and foundation, pillar and horizontal beam
Category Original Hardwares > Column Joint Hardware
Screw Stopper Omega Brace
TANAKA
3.50(2)
13.99 SGD
ADD TO CART
Equality Certificate: D15A08-01, Surface Processing: equivalent toJIS G 3302 (Z27), Standard: Japan Housing and Wood Technology Center, certified goods Z MARK hardwire (Chisel HB) EQUIVALENT CERTIFICATION, Thickness (mm): 1.6, Material: NFG550F, Accessories: Special (NO. 3) ANGLE OF bit screw (TBA-65D) x 12 BOOK, Application: Reinforcement of corners of roof truss and floor framing. Can be used as base of flint.
Category Original Hardwares > Flint Hardware
Post Fitting Bracket
TANAKA
5.00(2)
4.99 SGD
ADD TO CART
Purpose: To connect shed joist and pole plate, pole plate and column, girth and floor beam, and through pillar and girth., Proof Strength Test: Short acceptability tensile storess proof 8.0kN, N Value: 1.5 or less, Laws and Regulations: Second issue Notification No. 1460 (to), Surface Processing: JIS H 8610 (electro-galvanized) Grade 2 Ep-Fe / Zn 5 / CM2 C , Standard: Goods and Japan Housing and Wood Technology Center performance certification , Dimension (mm): 40x280, Thickness (mm): 3.2, Material: (Satisfying carbon steel strength division 4.6) (plate portion) JIS G 3131 (steel strip and hot rolled mild steel plate) SPHC (bolt portion) JIS B 1180, Accessories: Dedicated angle Bittobisu (TBA-65D) x4 this
Category Original Hardwares > Battledore Hardware
Countersunk Screw Diagonal Brace Box II
KANAI
5.99 SGD
ADD TO CART
Caution: Screws should be striked; 4pcs on column, 4pcs on horizontal member, 7pcs on diagonal brace. Use attached screws., Laws and Regulations: Corresponding to (d) 1, No. 1460 No. 1 Section Ministry of Land, Infrastructure and Transport Notification, Plate Thickness (mm): 2.3, Surface Processing: De to yuraru Court, Standard: No. No. 03A2113 (Foundation) Testing Center for Construction Materials accepted, Material: SPHC (JIS G3131), Accessories: YA-S45x15 Movies
Category Original Hardwares > Brace Joint Hardware
Hex Plate Bracket SD
TANAKA
5.00(2)
4.99 SGD
ADD TO CART
Caution: For tightening dedicated angle bit screw TBA-45, please use the (optional) third square bit., Purpose: For joining the end of the braces of 90mm x 90mm (3 times magnification wall) and braces of 45mm x 90mm (Double wall magnification), Proof Strength Test: 45 x 90 mm brace joints: per 1 m of goods and Japan housing & wood technology center performance certified bracing walls allowed 3.23 kN shear _ 000 D x _ 45 x 90 mm brace joints: per 1 m of goods and Japan housing & wood technology center performance certified bracing walls allowed 3.23 kN shear _ 000 D x _, Laws and Regulations: Notice No. 1460 No. 1(Ni and Ho), Surface Processing: Zn-11% Al-3% Mg-0.25 Si alloy coated steel sheet (superdyma), Dimension (mm): 170x170, Thickness (mm): 0.6, Material: NSDC 570: ZYXK18 (NEW JAPAN I...
Category Original Hardwares > Brace Joint Hardware
Rafter Clamp II
BX Kaneshin
4.00(1)
1.99 - 8.99 SGD
Dimension W (mm): 45, Material: ZAM(MSM-CC-DZC90), Accessories: (ZN40) x5 this thick nails
Category Original Hardwares > Rafter Hardware
Bracket
BX Kaneshin
4.50(2)
3.99 - 6.99 SGD
Surface Processing: Hot-dip galvanized steel sheet (Z27), Material: SGCC or 3302 SGHC JIS G, Accessories: (ZN65) x10 this thick nails
Category Original Hardwares > Sleeper Bracket Metal and Joist Hanger
Pillar Construction Braced Hardware III
BX Kaneshin
4.99 SGD
ADD TO CART
Standard: Inspection houseplus Corporation performance testing HP08-KT075/HP08-KT082, (GOODS) 2435 NO. 08 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 2434 NO., Material: ZAM * (MSM-HC-D90 OR MSM-CC-DA90), Caution: Please always join with installation screws Square bit(# 3) for screw junction is sold separately. Install the necessary hardware to pedestal and capital joints., Accessories: PILLAR SIDE ONLY (NUMBER 3) SQUARE SCREW CPQ-75 (BLUE) x 6 BOOKS, BRACING SIDE ONLY (NUMBER 3) SQUARE SCREW CPQ-45 (GREY) X 6, Application: It is the hardware which joins easily and firmly braces for wall magnification (90-105x45).
Category Original Hardwares > Brace Joint Hardware
Plating Bolt Nut
No Brand
4.33(3)
8.99 - 69.99 SGD
Category Original Hardwares > Washer Bolt Nut
Quake Resistant J Cable
TESAC
40.99 SGD
ADD TO CART
Material: WIRE ROPE/SUS304, SG SOCKETS / TAPER WASHER /SS400 (ELECTRO GALVANIZING), Set Contents: WIRE ROPE, SG SOCKET, TAPER WASHER
Category Original Hardwares
Decorative Stainless Steel Ornament
BX Kaneshin
5.00(1)
91.99 - 109.99 SGD
Category Original Hardwares > Stainless Pole Support
Joint Bracket, "Supreme Plate"
KANAI
1.99 SGD
ADD TO CART
Testing Center for Construction Materials: 09A0618, Notice No.1460 No.2: Is, N Value: Below 1.3, Short Allowable Tensile Strength (kN): 6.9, Thickness t (mm): 0.6, Surface Processing: Zinc alloy (Hot-dip galvanized steel plates), Overall Length (mm): 120, Material: SUPERDYMA NSDC570, Specification: Short-period standard tensile strength 6.9 kN, Accessories: Flat screw YA-F45 (SILVER) 4pcs
Category Original Hardwares
Joint Hardware, "K-TAISHIN NIITO"
KANAI
1.99 SGD
ADD TO CART
HOUSEPLUS Resident Warranty: HP05-KT025, Notice No.1460 No.2: Is, N Value: 1.2, Short Allowable Tensile Strength (kN): 6.7, Material: Alloy galvanized steel, Caution: To ensure a specified tolerance, please be within 200mm from the core pillars of the anchor bolt installation position(based on the Housing Finance Agency wooden house construction specification).Please use the dedicated screws Please do not tighten , Accessories: 3-SQUARE SCREW (45 x 8 YA-S), Application: SuperDyma(NIPPON STEEL CORPORATION registered trademark product) 0.6mm joint metallic material to connect column and joist, column and foundation etc.
Category Original Hardwares > Column Joint Hardware
Pulling Wing Plate Hardware
BX Kaneshin
5.00(2)
1.99 SGD
ADD TO CART
Surface Processing: Chromate plating (JIS H 8610 two kinds 2 grades Ep-Fe/Zn5/CM2), Standard: Japan Housing & Wood Technology Center / Z mark equivalent approved product (authorized goods: battledore bolt SB-E2), Material: JIS G 3131 SPHC, Caution: Hex bolts (M12) are not included, Application: Materials are pulled in combination with Hex bolts ( M12)
Category Original Hardwares > Battledore Hardware
Joint Plate
KANAI
1.99 SGD
ADD TO CART
HOUSEPLUS Resident Warranty: HP02-KT006, Notice No.1460 No.2: ha, N Value: 1.2 or less, Short Allowable Tensile Strength (kN): 6.4, Surface Processing: 2B material (cloth) , Material: JIS G4305 SUS430, Caution: In order to ensure strength, anchor bolt setting position should be within 200mm from pole core. (Based on the Housing Finance Agency wooden house construction specification) Use 1 pc per 1 place. Use included screw or nail., Accessories: No. 3 square-bis (YA-S45x8 pcs.) , Application: Joint metallic material to joint column and base
Category Original Hardwares > Column Joint Hardware
Freedom Corner F-C10
KANAI
5.99 SGD
ADD TO CART
Surface Processing: Dularcha coat, Material: JIS/G3131 SPHC, Caution: To ensure a specified tolerance, please be within 200mm from the core pillars of the anchor bolt installation position(based on the Housing Finance Agency wooden house construction specification).Please use the dedicated screws Please do not tighten , Accessories: No. 3 square screw (YD-N90x9pcs), Application: Joint metallic material to joint column and corner surface of horizontal beam
Category Original Hardwares > Hole Down Hardware
Corner Bracket F-C10
KANAI
6.99 SGD
ADD TO CART
Surface Processing: Dularcha coat, Material: JIS/G3131 SPHC, Caution: To ensure a specified tolerance, please be within 200mm from the core pillars of the anchor bolt installation position(based on the Housing Finance Agency wooden house construction specification).Please use the dedicated screws Please do not tighten , Accessories: 3-SQUARE SCREW (YD-N90x5, YD-N120x4), Application: Joint metallic material to joint column and corner surface of horizontal beam
Category Original Hardwares > Hole Down Hardware
Ace Templates III-Zm
BX Kaneshin
1.99 SGD
ADD TO CART
Testing Center for Construction Materials: 08A2927, Notice No.1460 No.2: Is, N Value: 1.3, Short Allowable Tensile Strength (kN): 7.4, Material: ZAM * (MSM-HC-DZC90 OR MSM-CC-DA90), Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Accessories: (No. 3) Rectangular-head screw CPQ-45(Gray) x 6 pcs., Application: Used to connect pillar and foundation, pillar and horizontal beam
Category Original Hardwares > Column Joint Hardware
Double Diagonal Brace Bracket
TANAKA
5.00(3)
4.99 SGD
ADD TO CART
Surface Processing: Hot-dip galvanized steel sheet (Z27), Standard: Japan Housing and Wood Technology Center Foundation Mark Z hardware (BP-2) equivalent certificatied, Thickness (mm): 2.3, Material: JIS G 3302(Hot-dip galvanized steel sheet and steel strip)SGHC or SGCC, Accessories: Exclusive (No. 3) bit angle screws (TB-45)x15 pcs, Application: For joining brace of 45mm x 90mm (2 times magnification wall) to pole and beam
Category Original Hardwares > Brace Joint Hardware

1 2 3 4 5 6 7 8 9 10 ...13 Next