Pneumatic Equipment, Hydraulic Equipment, Hoses

Nozzle Length (mm): 22

Minimum Bending Radius (mm): 30, Inside Diameter (inch): 3/16, Outer Diameter (mm): 10.4, Inner Diameter (mm): 4.8

Material: Body / brass, pipe scale / polycarbonate resin (PC), Size: Rc3 / 8 (female thread) at both ends, Weight (g): 190, Operating Temperature Range (deg C): 10 - 60, Dimensions L (mm): 89, Material (Seal): Nitrile rubber, Peak Flow Rate (L/min): 18 (0 - 18 adjustable), Dimensions D (mm): 33, Maximum Working Pressure (MPa [kgf/cm2]): 0.5[5], Dimensions T1 (mm): Rc3/8, Dimensions T2 (mm): Rc3/8, Dimensions H1 (mm): Hex 23, Dimensions H2(mm): Hex 26, Pressure Resistance (MPa [kgf/cm2]): 0.8[8], Torque Value N m (kgf cm): 12(122), Screw Size: 3/8 in.

Accessories: (Only suction work) Etching nozzle, brush nozzle, straight nozzle, nozzle extension pipe, dustbag, suction hose, fixing band x 2, Maximum Working Pressure (MPa): 3.0 (The maximum pressure that can be used continually), Body Weight (g): About 300, Caution: This product is high pressure only. Please pay attention about that the outlet is a high pressure coupler, the low-pressure coupler is not connected.

Purpose: General hydraulic plumbing hose, for low and medium pressure

Accessories: PF1/4 both male screw nipple x 1 (nipple comes with a standard O ring.), TRUSCO Part Number: 292-4480, Material: Body: PP O-rings: Viton Valve guide: PP Packing: Viton Valves: PP Y gasket: Viton Flow control valve: PP, Weight (g): 90, Maximum Working Pressure (MPa): 1.47, Dimensions A (mm): 133.5, Dimensions B (mm): 128, Discharge Rate (L/min): 40-290(at 0.5Mpa), Normal Working Pressure (MPa): Less than 0.98, Operating Temperature (deg C): 0 - 50, Compatible Fluid: Air, Connection Port: Air suction mouth:G(PF) 1/4 female screw (JS-02 plug standard equipment) Nozzle: M14 P=1.0 male screw Minimum diameter of nozzle: phi3mm x 1 hole

Length (m): 5, Negative Pressure Performance (kPa): -101.294, Purpose: For multi-purpose piping use

Length (m): 10

Material: Brass, Negative Pressure Performance (kPa): -101.294

Outside Diameter x Inside Diameter (phi mm): 8x6, Thickness (mm): 1

Assured Withstand Pressure (MPa): 1.5

Specification: Interlock design (special construction design PAT) structure

Maximum Working Pressure (MPa): 0.7 (at20deg C), Hose Dimension (Inner Diameter x Outside Diameter) (mm): 12x18

Assured Withstand Pressure (MPa): 1.5

Nominal Diameter: 15A, Fluid: Compressed air, Ambient Temperature (Degree C): 5 - 60, Pipe Diameter: (Entrance) Rc1/2 (EXIT) G1/4, Purpose: Automatically discharge stored drain

Material (Body): Steel (chromium plating), Fluid: Air, Operating Temperature Range (deg C): -20 - +80, Valve Structure: Valve available, Socket or Plug: Socket, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 1.5, Dimension D (phi mm): 26.5, Pressure Resistance (MPa [kgf/cm2]): 2.0[20]

Maximum Working Pressure (MPa): 20.0, Minimum Bending Radius (mm): 40, Name: 04, Inside Diameter (inch): 1/4, Outer Diameter (mm): 12.4, Inner Diameter (mm): 6.3

Normal Working Pressure (MPa): 0.6, Hose Mounting Nozzle: Rc1/4

Material: Band, housing part / SUS430 Bolt/steel (chromate plating), Destructive Torque (Nm): 4-4.6, Band Thickness (mm): 0.6, Bolt 2 Sides Width (mm): 7

Cycle(Hz): 50/60

Specification: Interlock design (special construction design PAT) structure, Material: Band, housing/ stress steel (SAE301) Bolt/Stainless steel (SAE305), Standard: SAE J1508 (hose clamp), Surface Processing: Trivalent chromate, Band Width (mm): 7.9, Maximum Tightening Torque ([n m kgf / cm]): 25[2.5], Bolt Head Shape: Six angles (6.3 mm)

Fluid: Air, Installation Shape: Nut, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 1.0, Dimension D (phi mm): 26.5, Pressure Resistance (MPa [kgf/cm2]): 1.5[15]

Length (m): 5, Negative Pressure Performance (kPa): -101.294, Purpose: General fluid power

Accessories: With bracket/With pressure gauge, Overall Length (mm): 87, Operating Temperature Range (deg C): +5 - +60, Maximum Working Pressure (MPa): 0.93, Set Pressure Range (MPa): 0.05 - 0.83

Material: PVC, Brittle Temperature (deg C): -38

Color: Black, Length (m): 20, Vacuum Pressure (kPa): -100

Connection Diameter: 1/4 plug, Maximum Working Pressure (MPa): 1, Nozzle Diameter (phi mm): 2, Nozzle Diameter: G1/8, Purpose: For drying, cooling, dust work by blowing

Purpose: Garden watering at general household

Accessories: Fixing band (phi19 - 38mm) x2 lines, suction hose, dust bag, brush nozzle, extension pipe nozzle, straight nozzle, narrow mouth nozzle, Osukapura, Working Pressure (MPa): 0.4 to 0.6 (recommended), Maximum Working Pressure (MPa): 0.8, Body Weight (g): About 300, Air Consumption (L/min): About 70 (0.6MPa at the time), Discharged Air Volume (L/min): About 850 or more (0.4MPa at the time)

Number of Ports: 2, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 5, Material (body): Brass, Heat Resistance Class: B

Purpose: For oil and pneumatic equipment, centralized lubrication equipment, coating equipment, chemical plant tubes

Material (Body): Steel, Maximum Working Pressure (MPa): 20.5, Material (O-Rings): NBR, Minimum Burst Pressure (MPa): 82

Material (Body): Steel (chromium plating), Fluid: Air, Operating Temperature Range (deg C): -20 - +80, Installation Shape: Bolt, Valve Structure: Without valve, Socket or Plug: Plug, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 1.5, Dimensions C (mm): 20, Pressure Resistance (MPa [kgf/cm2]): 2.0[20], Dimensions Bd (mm): 7.5

Color: Blue, Length (m): 5, Negative Pressure Performance (kPa): -101.294, Purpose: For multi-purpose piping use

Material: Hose/polyurethane, coupler / steel (chrome-plated), Fluid: Air, Operating Temperature Range (deg C): -5 - 60, Inner Diameter x Outside Diameter (phi mm): 5x8, Maximum Working Pressure (MPa): 0.8, Dimensions C (mm): 58phi +/- 5, Air Outlet: Two touch coupler

TRUSCO Part Number: 106-5025, Type: Portable Type, Weight (ｋg): 6.3, Mounting Bracket (secondary side): 20SH 1/4 socket coupler, Mounting Bracket (primary side): 1/4 bag of nut joint, Normal Opreration Pressure: 1, Material (Hose): 5/16 hose Vinylon knitting yarn reinforcement made ??of polyvinyl chloride, Hose Dimension (Overall Length) (m): 20, Hose Dimension (Inner Diameter x Outside Diameter) (mm): 8.0x14.5, Outer Dimensions (Width W x Height H x Depth D) (mm): 232x393.5x253

Cycle(Hz): 50/60

Fluid: Water, oil, chemicals, powders, air, Minimum Bending Radius (mm): 210, Purpose: Plant facilities and plumbing. Hoses for various embedded machines. Machine tools, assembly robots , molding machines, printing machine, etc., Caution: The numerical value for working pressure (MPA) [-0.1 to ] is only an approximation. Depending on the application and circumstances, it may not be available for use

Color: Orange

Material (Body): Steel, Maximum Working Pressure (MPa): 20.5, Material (O-Rings): NBR, Minimum Burst Pressure (MPa): 82

Material (Body): Carbon steel, Material (Seal): NBR, Maximum Working Pressure (MPa): 20.5

Purpose: For oil and pneumatic equipment, centralized lubrication equipment, coating equipment, chemical plant tubes

Height (mm): 121.5, Operating Temperature Range (deg C): -5 - 60, Mounting Screw: Rc1/4, Fluid: Compressed air, Normal Working Pressure (MPa): 1.6

Use Oil: SMR-100, Available Atmosphere Temperature (degree c): 7 to 40

TRUSCO Part Number: 231-4754, Overall Length (mm): 237, Material (Body): Polyacetal, Weight (g): 110, Operating Temperature Range (deg C): -5 - 60, Maximum Working Pressure (MPa): 1.6, Nozzle Length (mm): 90, Fluid: Compressed air, Nozzle Diameter (phi mm): 3.5, Material (Nozzle): With a nickel plated brass, Nozzle Shape: Standard type, Air Intake: Rc1/4, Purpose: For air blower and blowing dust.

Material (Body): Stainless steel, Fluid: Water, Operating Temperature Range (deg C): -20 - +80, Socket or Plug: Plug, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 1.5, Dimensions C (mm): 20, Dimensions Bd (mm): 7.5

Material (Body): Stainless steel, Fluid: Water, Operating Temperature Range (deg C): -20 - +80, Valve Structure: Valve available, Socket or Plug: Socket, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 1.5, Dimension D (phi mm): 25.4

Accessories: Bowl guard, Type: White type, Maximum Working Pressure (MPa): 1

Number of Ports: 5, Number of Positions: 2, Assured Withstand Pressure (MPa): 1.5

Material: Band: SUS301 Bolt: Steel, Band Width (mm): 19

Minimum Bending Radius (mm): 60, Outer Diameter (mm): 16.1, Inner Diameter (mm): 9.5

Minimum Bending Radius (mm): 80, Outer Diameter (mm): 19.9, Inner Diameter (mm): 12.7

Compatible: CF-06, CF-08, Rated Filtration (micrometer): 10

Compatible Filter: T-105A-1000 T-107A-1000

Outside Diameter x Inside Diameter (phi mm): 6x4, Thickness (mm): 1

Length (m): 10, Negative Pressure Performance (kPa): -101.294, Purpose: For multi-purpose piping use

Number of Ports: 2, Actuation: Normally closed, Pressure (kgf/cm2): 0.5 to 10

Maximum Working Pressure (MPa): 1.0, Equipment Configuration: Filter + regulator, Drain Discharge: Tire valve, Ambient Temperature and Water Temperature (Degree c): 5 - 65, Rated Filtration (micrometer): 5

Connection Diameter: G(PF)1/4, Air Consumption (L/min): 120, Nozzle Diameter (phi mm): 2, Nozzle Diameter: G(PF)1/8

Maximum Working Pressure (MPa): 0.8, Dimensions D (mm): 100, Dimensions B (mm): 500, Burst Pressure (MPa): 3, Hose Coupling: G1/4

Fluid: Air

Purpose: Thermal equipment and soft drink vending machines. High/low temperature equipment such as air-conditioning, transformer, OA equipment etc. Protection and insulation of internal wiring used in high temperature, high humidity working place.

Color: Natural transparent, Fluid: Water, oil, chemicals, powders, air, Hose Dimension (Inner Diameter x Outside Diameter) (mm): 25x33

Material (Body): Steel, Fluid: Air, Operating Temperature Range (deg C): -5 - +60, Installation Shape: Nut, Socket or Plug: Plug, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 1.5, Dimensions C (mm): 20, Pressure Resistance (MPa [kgf/cm2]): 2.0[20], Recommended Range for Torque Tightening (N m [kgf / cm]): 9 to 11[92 to 112], Dimension E (phi mm): 7.5

Vacuum Pressure (kPa): 0.014, Purpose: Pneumatic piping. Water pressure. Hydraulic pressure

Application: General dust work

Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa): 2, Material (body): Bronze, Heat Resistance Class: B, Drive System: Piston

Operating Temperature Range (deg C): 0 to 50, Mounting Direction: Freedom, Maximum Operating Frequency (Hz): 5, Pipe Connection Diameter: Rc1/4

Vacuum Pressure (kPa): -100, Purpose: Connection between screw and tube