Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

for Automobile

Sort by:
Showing 1 - 22 of 22 Results
Show: 30 60 90
VIEW: Grid View List View
The Socket Set, Thin Type) for 12.7sq Impact Wheel Nuts
Ko-ken Tool
5.00(2)
85.99 SGD
ADD TO CART
Caution: Specifically for wheel nuts and has a thin design, load-bearing properly is lower than normal sockets. Please pay attention to over torque., Width Across Flat (mm): (blue) 17, (red) 19, (yellow) 21, Dimension l (mm): (Blue) 21, (red) 23 (yellow) 25, Dimensions D (mm): 23.7 (Blue), (red)25.7 (Yellow)27.5, Plug Angle (mm): 12.7, Dimensions L (mm): (Blue / red / yellow) 110, Weight (g): 690, Set Contents: / 14145PM-110 impact foil nut sucket / 17 (blue), 19 (red) / 21 (yellow) Cardboard box, TRUSCO Part Number: 395-6873
Category for Automobile > Thin Wheel Socket (Torsion Type)
Over torque prevention impact socket
MonotaRO
33.99 SGD
Caution: * Since the over torque prevention function is a function dedicated to the right hand turn, it can not be used with the left turn. Torque standard less than 100 N / m depends on the tool to be used. Please use it by attaching it to impact wrench of maximum output 300 Nm or more. It is not a guaranteed value. Be sure to use torque wrench and general socket wrench after using this product, and tighten to the specified torque. It will not work properly with manual tools.Depending on the product, there are traces used for the insertion part etc. when inspecting, but it is not bad., This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: Wheel nut only, Plug Angle (mm): 12.7(1/2), Overall Length (mm): 100
Category for Automobile > Torque Management Type
12.7sq Wheel Nut Socket Set
MonotaRO
36.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., O-rings, pins not included. Make sure to install and replace the socket correctly. Check the status of this product before using, do not use when you find some problems as cracks. Please wear the protective glasses. Do not use for any other purpose than original to avoid accidents or injuries. Please note that the socket in the set is different from the separately sold MonotaRO brand O-ring, and product with the pin., Case Dimension (mm): (Height H x Width W x Depth D) 45 x 150 x 130, Outer Diameter (phi mm): [No cover / with cover]. (Blue) 24.5 / 27.0. (Yellow) 26.5 / 29.0. (Red) 28.5 / 31.0, Plug Angle (mm): 12.7(1/2sq), Overall Length (mm): 86, Material: Chrome molybdenum steel...
Category for Automobile > Thin Wheel Socket (With Resin Cover)
Wheel Nut Socket
MonotaRO
12.99 - 13.99 SGD
Plug Angle (mm): 12.7(1/2sq), Overall Length (mm): 86, Material: Chromium molybdenum steel (CR over MO)
Category for Automobile > Thin Wheel Socket (With Resin Cover)
1/2"sq. ALUMINIUM SOCKET SET (3pcs.) FOR POLISHED NUT
KYOTO TOOL (KTC)
119.99 SGD
ADD TO CART
Caution: Withstand load is low because it is made for aluminum wheel. For tightening of aluminum wheel nut, please follow the limit torque of each manufacturer., Withstand load is low because it is made for aluminum wheel. For tightening of aluminum wheel nut, please follow the limit torque of each manufacturer., Withstand load is low because it is made for aluminum wheel. For tightening of aluminum wheel nut, please follow the limit torque of each manufacturer., Purpose: For removing and mounting of aluminum wheels, face nut., For removing and mounting of aluminum wheels, face nut., For removing and mounting of aluminum wheels, face nut., Plug Angle (mm): 12.7, Weight (g): 415, Set Contents: Aluminum wheel cosmetic nut socket for impact wrench (ABP4 over 17ALP, 19ALP, 21ALP)
Category for Automobile > Thin Wheel Socket
The Socket for 12.7Sq Impact Wheel Nuts, Thin Type
Ko-ken Tool
4.25(8)
28.99 - 34.99 SGD
Caution: Specifically for wheel nuts and has a thin design, load-bearing properly is lower than normal sockets. Please pay attention to over torque., Plug Angle (mm): 12.7, Dimensions L (mm): 110
Category for Automobile > Thin Wheel Socket (Torsion Type)
Super Long Impact Socket, Thin-WalLED Type, 12.7mm Insertion Angle
TOP KOGYO
5.00(2)
19.99 - 48.99 SGD
Plug-in Angle (mm [inch]): 12.7[1/2]
Category for Automobile > Thin Wheel Socket
Impact Wrench Socket
MITOLOY
4.00(1)
14.99 - 35.99 SGD
Plug-in Angle (mm [inch]): 12.7[1/2], Shape: Hexagonal
Category for Automobile > Thin Wheel Socket
Impact wrench socket (for semi-long car tires , thin type)
MITOLOY
4.00(1)
30.99 - 40.99 SGD
Dimention D2 (phi mm): 38, Plug-in Angle (mm [inch]): 19.0[3/4]
Category for Automobile > Thin Wheel Socket
1/2"sq. ALUMINIUM SOCKET FOR POLISHED NUT
KYOTO TOOL (KTC)
33.99 - 34.99 SGD
Dimension D2 (mm): 29, Plug Angle (mm): 12.7, Caution: For removing and mounting of aluminum wheels, face nut., Application: For removing and mounting of aluminum wheels, face nut.
Category for Automobile > Thin Wheel Socket
Impact Socket, Torsion Type
Osaka Spirit
17.99 SGD
Outlet Corner (sq.): 1/2(12.7mm), Overall Length (mm): 100, Material: Chromium-molybdenum
Category for Automobile > Thin Wheel Socket (Torsion Type)
Torque Protection Adapter
SSPOWER
4.00(5)
48.99 SGD
Caution: Torque standard under 100Nm (It changes depend on tools you use. It is not guarantee value.), Material: Chrome molybdenum steel
Category for Automobile > Torque Management Type
Thin Type Wheel Nut Socket for Impacts
TONE (Maeda Metal Industries)
5.00(5)
22.99 - 29.99 SGD
Caution: Since it is a thin form type, when excessive strength is applied, it may be torn at an early stage., Plug Angle (mm): 12.7
Category for Automobile > Thin Wheel Socket
Thin Type Long Wheel Nut Socket for Impacts
TONE (Maeda Metal Industries)
5.00(1)
25.99 - 28.99 SGD
Caution: Since it is a thin form type, when excessive strength is applied, it may be torn at an early stage., Plug Angle (mm): 12.7
Category for Automobile > Thin Wheel Socket
Torque Protection Socket
SSPOWER
5.00(2)
48.99 SGD
Caution: Torque standard under 100Nm (It changes depend on tools you use. It is not guarantee value.), Plug Angle (mm): 12.7, Material: Chrome molybdenum steel
Category for Automobile > Torque Management Type
Socket set 12.7mm(with plastic cover of scratch-resistant)
TECH
54.99 SGD
ADD TO CART
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., Overall Length (mm): 85, Set Contents: 17,19,21mm
Category for Automobile > Thin Wheel Socket (With Resin Cover)
Deep Socket
OHASHI (BAL)
-
Square Drive Insertion Angle (mm): 12.7, Material: Chromium-molybdenum steel, plastic (protector), Specification: Face catch socket type, air impact wrench corresponding
Category for Automobile > Thin Wheel Socket (With Resin Cover)
Wheel Nut Socket Set
MonotaRO
-
Caution: O-rings/pins not included., Case Dimension (mm): (height H x width W x depth D) 55x150x134, Outer Diameter (phi mm): [No cover / Cover] _x000D _ (Blue)24.5/26.5 (Yellow)26.3/28.5 (Red)28.3/30.5, Plug Angle (mm): 12.7, Weight (g): 710, Overall Length (mm): (Blue/yellow/red) 78, Set Contents: (Opposite side of 17 mm) Blue _x000D _ (Opposite side of 19 mm) Yellow _x000D _ (Opposite side of 21 mm) Red
Category for Automobile > Thin Wheel Socket (With Resin Cover)
1/2 "impact for the SQ wheel nut socket professional mold Cased set
SIGNET
3.00(2)
-
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Plug Angle (mm): 12.7, Overall Length (mm): 85, Set Contents: 17,19,21mm
Category for Automobile > Thin Wheel Socket (With Resin Cover)
1/2 "SQ wheel nut impact socket
SIGNET
-
Category for Automobile > Thin Wheel Socket (With Resin Cover)
Impact Socket
GREAT TOOL
3.00(2)
-
Purpose: For desorption of wheel nut at the time of changing the tires, Plug-in Angle (mm [inch]): 12.7[1/2], Overall Length (mm): 84, Accessories: With O ring pin
Category for Automobile > Thin Wheel Socket (With Resin Cover)
Socket for Impact Wrench
Plug Angle (mm): 12.7, Overall Length (mm): 86, Material: Chromium-molybdenum steel (CR-MO)
Category for Automobile > Thin Wheel Socket (With Resin Cover)

1